• From: Bulgaria
  • Registered: 2023-06-09
  • Posts: 87

Re: Babyface Pro FS - Pink noise from right output channel after startup

anoise wrote:

This morning, after the PC boots up, I start to listen to a track, and I was not sure if I was not hearing right or what. The music was bass heavy. I don't remember making that track that way. I disable the EQ in Totalmix and I hear a pop/click in the right channel and the track sounds "normal" again.
So, the EQ did not load correctly on startup but not the extremes of distortion or white noise... it seems (very rarely) it can load with less extreme EQ boosts.

Today I had the exact same problem.
I had no noise, just a super loud low end.

Memo Pro
https://linktr.ee/memopro
Babyface Pro FS

memopro's Website

  • Registered: 2013-10-28
  • Posts: 79

Re: Babyface Pro FS - Pink noise from right output channel after startup

Looks like a solution was found, check this:
https://forum.rme-audio.de/viewtopic.ph … 34#p241534

203 Reply by memopro (edited by memopro 2025-09-01 22:41:48)

  • From: Bulgaria
  • Registered: 2023-06-09
  • Posts: 87

Re: Babyface Pro FS - Pink noise from right output channel after startup

Thanks!
It would be great if this solves the problem.
Downloaded the file and there is only one Workspace, no Snapshot. https://ibb.co/Kpc3cvhz
This is how it looks on me and I couldn't make any noise, I was starting, restarting, switching between my Workspace and the one provided by NientG.
But that doesn't matter, if Matthias Carstens managed to make noise and found the problem and fixed it with the firmware update.
I hope this is fixed now and I don't have to change my audio interface. By the end of September, a ROOM EQ is expected to be available for this interface (Room EQ did not work with BF) (Room EQ needed DSP which the BF Pro does not have).

PS:
I changed a few settings in the NientG workspace and when I switched to my workspace the noise came back in. Yes it's the same pink noise, the problem is the same, and is only on the right main output.

https://www.youtube.com/watch?v=VVW0ZDkonlE

Memo Pro
https://linktr.ee/memopro
Babyface Pro FS

memopro's Website

  • Kubrak
  • DAW Mastermind
  • Offline
  • Registered: 2023-08-03
  • Posts: 1,476

Re: Babyface Pro FS - Pink noise from right output channel after startup

Babyface is going to have RoomEQ???? Are you sure?

FF UCX II, Digiface USB, Babyface Pro FS
  • From: Bulgaria
  • Registered: 2023-06-09
  • Posts: 87

Re: Babyface Pro FS - Pink noise from right output channel after startup

Kubrak wrote:

Babyface is going to have RoomEQ???? Are you sure?

Beta version
https://forum.rme-audio.de/viewtopic.php?id=42030

Memo Pro
https://linktr.ee/memopro
Babyface Pro FS

memopro's Website

  • From: Bulgaria
  • Registered: 2023-06-09
  • Posts: 87

Re: Babyface Pro FS - Pink noise from right output channel after startup

Here is a video from tonight:
https://www.youtube.com/watch?v=VVW0ZDkonlE

Memo Pro
https://linktr.ee/memopro
Babyface Pro FS

memopro's Website

207 Reply by ramses (edited by ramses 2025-09-01 21:51:25)

  • ramses
  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 15,574

Re: Babyface Pro FS - Pink noise from right output channel after startup

memopro wrote:
Kubrak wrote:

Babyface is going to have RoomEQ???? Are you sure?

Beta version
https://forum.rme-audio.de/viewtopic.php?id=42030

I think this is a misunderstanding. RoomEQ requires a dedicated DSP, which the BBF Pro does not have.
See also this posting: https://forum.rme-audio.de/viewtopic.ph … 16#p241416

That needed DSP (which the BBF Pro does not have) is also the one providing the FX.

Consequently, only interfaces equipped with it, such as the UCX II, 802 FX, UFX II, UFX III, MADIface XT II or HDSPe MADI FX, support RoomEQ (and Crossfeed).

BR Ramses - HDSPe MADI FX, M-1620 Pro D, 12Mic, UFX III, ADI-2 Pro FS R BE, Nuendo 15, Win10 IoT Ent

208 Reply by ramses (edited by ramses 2025-09-01 21:50:43)

  • ramses
  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 15,574

Re: Babyface Pro FS - Pink noise from right output channel after startup

memopro wrote:

Here is a video from tonight:
https://www.youtube.com/watch?v=VVW0ZDkonlE

This shows EQ, not RoomEQ.
See also this posting: https://forum.rme-audio.de/viewtopic.ph … 16#p241416

BR Ramses - HDSPe MADI FX, M-1620 Pro D, 12Mic, UFX III, ADI-2 Pro FS R BE, Nuendo 15, Win10 IoT Ent
  • From: Bulgaria
  • Registered: 2023-06-09
  • Posts: 87

Re: Babyface Pro FS - Pink noise from right output channel after startup

Kubrak wrote:

Babyface is going to have RoomEQ???? Are you sure?

I read somewhere that TotalMix FX 2 will work with all RME models from the last 20 years and I automatically thought that Room EQ would also work on Babyface, but I could be wrong.

Memo Pro
https://linktr.ee/memopro
Babyface Pro FS

memopro's Website

210 Reply by ramses (edited by ramses 2025-09-01 21:56:36)

  • ramses
  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 15,574

Re: Babyface Pro FS - Pink noise from right output channel after startup

memopro wrote:
Kubrak wrote:

Babyface is going to have RoomEQ???? Are you sure?

I read somewhere that TotalMix FX 2 will work with all RME models from the last 20 years and I automatically thought that Room EQ would also work on Babyface, but I could be wrong.

See my last two postings above.

And TotalMix FX is the common control GUI for all interfaces that support TotalMix FX, but they have different HW capabilities.
So not everything is available on every HW.

BR Ramses - HDSPe MADI FX, M-1620 Pro D, 12Mic, UFX III, ADI-2 Pro FS R BE, Nuendo 15, Win10 IoT Ent
  • From: Bulgaria
  • Registered: 2023-06-09
  • Posts: 87

Re: Babyface Pro FS - Pink noise from right output channel after startup

ramses wrote:
memopro wrote:

Here is a video from tonight:
https://www.youtube.com/watch?v=VVW0ZDkonlE

This shows EQ, not RoomEQ.
See also this posting: https://forum.rme-audio.de/viewtopic.ph … 16#p241416

No, here I show that I was able to cause noise and how to fix the problem.

Memo Pro
https://linktr.ee/memopro
Babyface Pro FS

memopro's Website

212 Reply by ramses (edited by ramses 2025-09-01 21:57:40)

  • ramses
  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 15,574

Re: Babyface Pro FS - Pink noise from right output channel after startup

memopro wrote:
ramses wrote:
memopro wrote:

Here is a video from tonight:
https://www.youtube.com/watch?v=VVW0ZDkonlE

This shows EQ, not RoomEQ.
See also this posting: https://forum.rme-audio.de/viewtopic.ph … 16#p241416

No, here I show that I was able to cause noise and how to fix the problem.

Ok, sorry, I saw this posting in the context of your question / claim about RoomEQ as the postings followed one after the other.

BR Ramses - HDSPe MADI FX, M-1620 Pro D, 12Mic, UFX III, ADI-2 Pro FS R BE, Nuendo 15, Win10 IoT Ent
  • From: Bulgaria
  • Registered: 2023-06-09
  • Posts: 87

Re: Babyface Pro FS - Pink noise from right output channel after startup

Yeah, I'm not familiar with the technical stuff. Apparently Room EQ doesn't work on Babyface. I apologize.

Memo Pro
https://linktr.ee/memopro
Babyface Pro FS

memopro's Website

  • ramses
  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 15,574

Re: Babyface Pro FS - Pink noise from right output channel after startup

memopro wrote:

Yeah, I'm not familiar with the technical stuff. Apparently Room EQ doesn't work on Babyface. I apologize.

No need to apologize, all good. We all learn new things ...

BR Ramses - HDSPe MADI FX, M-1620 Pro D, 12Mic, UFX III, ADI-2 Pro FS R BE, Nuendo 15, Win10 IoT Ent

215 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 26,987

Re: Babyface Pro FS - Pink noise from right output channel after startup

https://forum.rme-audio.de/viewtopic.ph … 34#p241534

And no RoomEQ for Babyface. Nowhere did we say that.

Regards
Matthias Carstens
RME

MC's Website