• From: Italy
  • Registered: 2026-07-28
  • Posts: 6

Topic: OSC command to select specific submix

Hi all!
I am trying to build my little script to control TotalMix and I am not able to find any OSC command to select a specific submix.
In fact, if I listen through the UDP connection with a software like Protokol I don't see anything when I select different Outputs. Its like TotalMix won't send anything and will perform this action without talking to the OSC channel. 
Do you guys confirm that it is not possible or maybe I am missing something?

Thanks!

Michele

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 7,681

Re: OSC command to select specific submix

Workaround : select output fader and move the fader a little bit, in Totalmix this has the effect of selecting the channel for submix.

M1-Tahoe, Madiface Pro, Digiface USB, Babyface silver and blue
  • From: Germany
  • Registered: 2007-04-10
  • Posts: 11,142

Re: OSC command to select specific submix

waedi wrote:

Workaround : select output fader and move the fader a little bit, in Totalmix this has the effect of selecting the channel for submix.

No need to move the fader, just click on the channel...

Regards
Daniel Fuchs
RME

RME Support's Website

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 7,681

Re: OSC command to select specific submix

RME Support wrote:
waedi wrote:

Workaround : select output fader and move the fader a little bit, in Totalmix this has the effect of selecting the channel for submix.

No need to move the fader, just click on the channel...

Yes in Totalmix, but without Totalmix over OSC remote, there is no command for "click on channel" right ?

M1-Tahoe, Madiface Pro, Digiface USB, Babyface silver and blue
  • From: Italy
  • Registered: 2026-07-28
  • Posts: 6

Re: OSC command to select specific submix

waedi wrote:

Workaround : select output fader and move the fader a little bit, in Totalmix this has the effect of selecting the channel for submix.

well, if I move my output faders (via OSC obviously) it won't change the submix right now. Maybe there is something in the setup that I am missing?

Thanks!

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 7,681

Re: OSC command to select specific submix

I don't know. Experts will answer soon

M1-Tahoe, Madiface Pro, Digiface USB, Babyface silver and blue