Hello,

I am using the ADI-2 Pro FS in connection with a HSDPE Raydat.
The Raydat is set as the MasterClock.

The setup Is as followed:
ADAT 1 : Some other external ADAT device (not RME)
ADAT 2: ADI-2 Pro FS
ADAT 3: not used
ADAT 4: not used
AES: Some other Device (not RME)

ADI-2 Pro FS is set to auto concerning clock.
When I do change the samplerate, I can see also the change on ADI-2 side.
Sound comes out, so it seems to be OK.

However: I do not understand why the ADI-2 is not seen to be synchronized on the settings dialog of the Hammerfall DSP .
The first device on ADAT 1 is shown, the device on AES also.
But on ADAT 2 , where the ADI-2 is connected, nothing is shown that a sync or lock will be done.
In detail the appropriate group box looks like that

---Input Status---
ADAT 1    Sync     48 khz
ADAT 2    No lock                  (=> here, the ADI2 should be shown somehow, or?)
ADAT 3    No lock
ADAT 4    No lock
AES         Lock     96 khz
SPDIF      No lock
TCO         No lock
Sync in    No lock

Clock source for Raydat is set to Internal / Master

I am confused, why isnt it shown?
What do I understand wrong?

Thanks in advance for your answer and help.