You are not logged in. Please login or register.
RME User Forum → ADI-2 & 2/4 Pro series, ADI-2 DAC series → Switching Basic mode to DAC changes SRC and Clock setting
Hi,
I have a clock set to Internal (not auto) and SRC to SPDIF in.
But every time I switch the mode to DAC, these two settings will change. (SRC to off, and Clock to AES)
I have AES/EBU connected as a loop for Digicheck NG.
Is this a normal behaviour? Is there a way to prevent this change?
Thank you.
I think yes, it is normal behaviour.
You switch it to DAC mode and the device is following your order and try to keep working with any digital source available.
I suggest disconnect that loop cable and use Totalmix Loopback function for DigicheckNG and clock source shall be internal.
Thanks for the confirmation.
The ADI-2 Pro manual includes a detailed description of the DAC mode, including this:
- Simple 2 channel stereo operation
- In this mode the source selection of Main Out 1/2 also defines the clock source of the unit
Therefore AES loopback won't work anyway. Better stay in multichannel normal mode.
@waedi: No TotalMix - no Loopback.
The ADI-2 ... DAC mode, including this:
- Simple 2 channel stereo operation
- In this mode the source selection of Main Out 1/2 also defines the clock source of the unit ...
This simplicity is why I settled on DAC mode for home use.
One person listening to one source at a time, that’s it.
Studio use is another story…
@waedi: No TotalMix - no Loopback.
Ah ! This ADI-2 have no Totalmix.
But how can he use DigicheckNG ?
There must be a RME interface for having Digicheck running and therefor a Totalmix must be there.
As always, how wrong am I ?
DIGICheck works as ASIO host and accesses the RME recording interface through the ASIO driver which is multi-client capable.
See also DIGIcheck help: Overview -> DIGICheck
https://www.dropbox.com/s/8izbs3h0il9l2 … 7.png?dl=0
I give up. I believe it as it is. ASIO means Windows PC. They can use Digicheck for free. Nice for them.
In another thread I found the information that he uses MacOS, I thought it was Windows like in many other cases.
> I give up.
@waedi: ups .. I only told you this for information in the hope it would be useful, not to criticise you in any way / in person.
Would be nice if more ppl would put some basic info about setup (OS and RME recording interface) into forum signature.
In some cases this would be a very helpful reminder, what the topic is all about...
@Ramses you are great ! Pleasure to read your entries and always learn something. Normally Waedipedia knows everything better.
RME User Forum → ADI-2 & 2/4 Pro series, ADI-2 DAC series → Switching Basic mode to DAC changes SRC and Clock setting
Powered by PunBB, supported by Informer Technologies, Inc.
