Topic: ADI-2 Pro [v116]: CC Mode not properly restored from config
Hi.
I noticed that CC-Mode settings are not properly restored when loading a different setup while USB is plugged.
I thought that unplugging of USB cable is only needed when changing CC-Mode interactively.
This means that a restore cannot be performed fully (including CC-Mode setting) as long as USB is plugged.
I regard this as a bug.
As a workaround, I tried two things
a) to unplug/replug USB in a 2nd step and
b) to power-cycle the device
But in both cases, CC-Mode stays in the wrong state.
Which means, that the config has not been fully restored in terms of CC-Mode.
If at least the config were to 100% recovered—as it should be the case—I could live with it, that a power-cycle is needed to change CC-Mode (if USB is plugged). But currently the config is not fully restored in terms of CC-Mode and this is not so good.
This can lead to confusion, as you think you restored the proper configuration with suitable CC-mode, but in fact CC-mode simply stood in the previous state.
Could you kindly have a look at this, whether this could be solved?
ADI-2 Pro FS R BE, Fw v116.