Topic: New remote not working
I have an ADI-2 DAC fs v2 since July, 2020 and never used the remote as I was using the DAC on a desktop. I kept the remote in its plastic bag, and the original battery out as not to discharge it.
2+ years later I moved the DAC to a far field system and I decided to finally use the remote, and to my surprise it is not working. Pressing volume up or down blinks the green LED, and if I keep pressing a button it keeps blinking green, but nothing happens in the DAC. No other button works.
I measured the battery with my DMM and it is 3.0V alright.
I tried the instructions on the back, holding SEL button, it keeps green, and when I release it, it goes to red and blue and dark. Nothing happens, still not working.
Yes, I searched the manual, could not find anything useful. I searched the Options menu if there was something blocking it, nope, nothing.
Firmware is 47 so fairly up to date. Edit: updated to the latest 78/50 (setup menu says SW version 51 06/2022), still nothing.
Of course the volume knob on the DAC works normally.
Did I get a bad remote or what? Any other ideas? Thanks in advance.