• Registered: 2025-09-27
  • Posts: 3

Topic: Digicheck NG doesn't work with my HDSPe AoX D.

I've installed the Digicheck NG (latest version en also tried the beta 2) and in the Audio Device Setup it sees the card.
But when I click on Enable audio processing it comes with ' No configured Audio Device is available. Open Audio Device Setup ?'

When I choose yes, it comes to the setup page and here it states my card and marked in use.
Also the main screen at the top says: Digiceck NG - not available: HDSPe AoX (....)

Does Digicheck works with my card or is the're something else going on ?

I'm working on a Mac studio M1 Ultra running Sequoia 15.2 with the card in a thunderbolt case.
The card and Totalmix runs perfectly running 2 Ferrofisg A32Pro D and several other dante devices in the networks.

So much thanks for your support...

2 Reply by ramses (edited by ramses 2025-09-27 13:51:10)

  • ramses
  • ramses
  • DAW Mastermind
  • Online
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 15,570

Re: Digicheck NG doesn't work with my HDSPe AoX D.

As far as I can see DIGICheck is not mentioned on the HDSPe AoX D product page, nor is the card listed on the DIGICheck NG download page among the supported products.

https://www.dropbox.com/scl/fi/tlhg1krooiwf1u6yqch6n/2025-09-27-DIGICheck-NG-0.93-list-of-supported-products.jpg?rlkey=ikjdinmf6wc93mfn17ci4l7hu&st=q0iuew66&dl=1

BR Ramses - HDSPe MADI FX, M-1620 Pro D, 12Mic, UFX III, ADI-2 Pro FS R BE, Nuendo 15, Win10 IoT Ent
  • Registered: 2025-09-27
  • Posts: 3

Re: Digicheck NG doesn't work with my HDSPe AoX D.

I have tried Digicheck NG version 0.93 beta 2 (3) and Version 0.93 (1)
The firmware for the AoX D card is Driver V1.0 Firmware 59/1.1.0/18

4 Reply by ramses (edited by ramses 2025-09-27 13:53:24)

  • ramses
  • ramses
  • DAW Mastermind
  • Online
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 15,570

Re: Digicheck NG doesn't work with my HDSPe AoX D.

Djediiz wrote:

I have tried Digicheck NG version 0.93 beta 2 (3) and Version 0.93 (1)
The firmware for the AoX D card is Driver V1.0 Firmware 59/1.1.0/18

I updated my initial reply as it seems that DIGICheck is not supported by the card and vice versa.
Please re-read above, thanks.

BR Ramses - HDSPe MADI FX, M-1620 Pro D, 12Mic, UFX III, ADI-2 Pro FS R BE, Nuendo 15, Win10 IoT Ent
  • Registered: 2025-09-27
  • Posts: 3

Re: Digicheck NG doesn't work with my HDSPe AoX D.

ramses wrote:

As far as I can see DIGICheck is not mentioned on the HDSPe AoX D product page, nor is the card listed on the DIGICheck NG download page among the supported products.

https://www.dropbox.com/scl/fi/tlhg1krooiwf1u6yqch6n/2025-09-27-DIGICheck-NG-0.93-list-of-supported-products.jpg?rlkey=ikjdinmf6wc93mfn17ci4l7hu&st=q0iuew66&dl=1

OK, I've read somewhere on the forum that someone was redirected to the beta software and that it should work.
Thanks for the reply and hope that in the near future this card will be supported...

  • ramses
  • ramses
  • DAW Mastermind
  • Online
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 15,570

Re: Digicheck NG doesn't work with my HDSPe AoX D.

Djediiz wrote:

OK, I've read somewhere on the forum that someone was redirected to the beta software and that it should work.
Thanks for the reply and hope that in the near future this card will be supported...

Either wait a little whether RME answers, its weekend or ask RME support by E-Mail and send the link to this thread.

BR Ramses - HDSPe MADI FX, M-1620 Pro D, 12Mic, UFX III, ADI-2 Pro FS R BE, Nuendo 15, Win10 IoT Ent

7 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 26,987

Re: Digicheck NG doesn't work with my HDSPe AoX D.

The AoX-D already works with DC NG, but not error free. Its high numbers of channels cause issues in several plces that need to be addressed and are already mentioned in this forum (somewhere).

Regards
Matthias Carstens
RME

MC's Website