• Registered: 2026-05-09
  • Posts: 7

Topic: Digiface Dante and totalmix

I´ve this issue and I don´t know what´s happening:

I´m playing music with my new Digiface Dante, but when I want to listen thru headphones I hear just for one channel. Then when I open Total Mix, no Mixer neither Matrix window open... In DigiCheck I can see both channels.
Can sombody help me with this issue?.

Thank you very much in advance

  • Kubrak
  • DAW Mastermind
  • Offline
  • Registered: 2023-08-03
  • Posts: 1,503

Re: Digiface Dante and totalmix

Which OS?

Sidenote.
DigiCheck shows Ins and SW Playbacks, not Outs. So, you cannot check by DigiCheck, that the both channels are routed to Phones.

Well, you could check it on corresponding Input, if you activate loopback on Phones. But to do that you need fully working TotalMix... And in that case, you would not need to check it in DC, you could have a look in TM.

FF UCX II, Digiface USB, Babyface Pro FS
  • Registered: 2026-05-09
  • Posts: 7

Re: Digiface Dante and totalmix

Hi Kubrak, thanks for your interest. My OS is Tahoe 26.3 on Mac M5. If I connect another mac with DVS to Digiface primary port I can see both channels in Digicheck. So I routed this two channel music via Dante to Luna WS stereo input and send it to Master out and only hear one channel. My doubs is why I cant confugure my Total mix????

4 Reply by waedi (edited by waedi 2026-05-09 16:30:43)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 7,387

Re: Digiface Dante and totalmix

Totalmix should open in any case also with the interface disconnected.

Have you installed the latest version 20.1 ?

https://rme-audio.de/downloads/tmfx_201_1991_mac.zip

M1-Tahoe, Madiface Pro, Digiface USB, Babyface silver and blue

5 Reply by fdcfrank (edited by fdcfrank 2026-05-09 19:07:03)

  • Registered: 2026-05-09
  • Posts: 7

Re: Digiface Dante and totalmix

Totalmix open, but doesen´t permits to create new Mixer neither new Matrix. I´ve installed the latest software and firmware. Indeed I´ve created a new offline device from Options Menu, but I can go online...

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 10,995

Re: Digiface Dante and totalmix

https://rme-audio.de/files/uploads/Support/image002.png

Regards
Daniel Fuchs
RME

RME Support's Website

7 Reply by fdcfrank (edited by fdcfrank 2026-05-09 20:40:14)

  • Registered: 2026-05-09
  • Posts: 7

Re: Digiface Dante and totalmix

Hi Daniel and thank you for the images. All the setting are ok, but my main issue is when I open Totalmix software it doesn´t detects my Digiface Dante. Any clues?.

I´m sending audio from one mac to Digiface Dante with DVS. and I´m receiving both channels, but I listen only the left channel on the phones output. Thats the reason what I want to open Totalmix, to see what´s happening...

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 10,995

Re: Digiface Dante and totalmix

You didn't mention which driver you installed.
https://rme-audio.de/rme-macos.html

Regards
Daniel Fuchs
RME

RME Support's Website

9 Reply by fdcfrank (edited by fdcfrank 2026-05-10 09:53:10)

  • Registered: 2026-05-09
  • Posts: 7

Re: Digiface Dante and totalmix

Hi Daniel. This is all the software an driver intalled:

Fireface USB DK 427 (totalmix included right?).
RME USB Series Flash Tool v3.74.
DigicheckNG_093.

Thanks

10 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 27,014

Re: Digiface Dante and totalmix

You might need to allow Microphone for TotalMix in System Settings.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2026-05-09
  • Posts: 7

Re: Digiface Dante and totalmix

Hi Matthias thanks for you help.

Totalmix doesn´t appear in my system settings...

  • Registered: 2026-05-09
  • Posts: 7

Re: Digiface Dante and totalmix

YESSSSSSS, Problem solved!. My interface rocks on!!!!.

Seemed an USB adapter problem

Thanks for all