Topic: no signal in totalmix output

Hello, I’m having a major issue with TotalMix and my RME Fireface 800 audio interface.

Indeed, I have a signal coming into the software and hardware inputs, but there is no signal at my output or in my headphones, even though they are correctly assigned.

.It was still working a few days ago. I’ve tried deleting and reinstalling the sound card drivers, as well as uninstalling TotalMix and reinstalling the latest version, but the problem persists.

The sound card is being recognized, and the signal is coming into the inputs, but there’s absolutely no signal reaching the outputs or the headphones.
I haven’t been able to find a solution online, and neither have the sound technicians I know...

please help me—I have a recording session with a band in two weeks! Thanks.

Re: no signal in totalmix output

There is no visible signal in TotalMix or there is no physical signal at the outputs? Did you try a total reset of TotalMix via Option-> Reset Mix.

Regards,
Audio AG Support

Re: no signal in totalmix output

there is no visible signal in totalmix. I've tryed with an other computer but it's the same

Re: no signal in totalmix output

https://i.postimg.cc/pXjXWhQ2/attachmen … 346923.jpg

Re: no signal in totalmix output

Analog inputs 1-8 show no signal at all ("UFL"), something is definitely defective here, sorry. The unit will need service.

Regards
Daniel Fuchs
RME

Re: no signal in totalmix output

i did'nt put any microphone on AN 1-8 so it'q logical, excuse my translation, Iam french

Re: no signal in totalmix output

No, there is always a db number with ground noise there where UFL is mentioned in the inputs. At your device there is no signal coming from the converters. It needs a repair.

Regards,
Audio AG Support

Re: no signal in totalmix output

The AD conversion is defective, and apparently the DA conversion at the outputs is defective as well. This is just a clear indicator that the unit is not working as it should...

Regards
Daniel Fuchs
RME

Re: no signal in totalmix output

ok thank you very much