1 (edited by frank.acklin 2026-11-03 14:10:15)

Topic: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

Hi!

If you have all 3 SSL Surfaces (UF8, UC1 and UF1) and you're anything like me, you find that the UF1 really doesn't get much use besides the other two. I bought it for my work on Rea-Sixty, an Open-Source Extension (360 Replacement) for SSL Hardware on REAPER, so I had all the buttons, fader and displays sniffed out and ready to do whatever.

The UF1 just sat there next to my rme ARC.
I looked at it. And then the ARC. Back to the UF1... and it hit me: It's just an ARC with 2 displays and more buttons!

So I built a small Mac app that turns the SSL UF1 into a remote control for TotalMix FX. It's called ORC, it's free, and it sits in the menu bar, no DAW needed.

The fader, the pots and the keys move TotalMix directly over Global OSC, and the two screens on the UF1 show what TotalMix is doing: channel names and colours, levels, the EQ with graph, reverb and echo.

You need macOS 13 or later, a UF1 on USB and TotalMix FX 2.1 or later. SSL 360 has to be closed while ORC has the UF1. In TotalMix it takes one free OSC remote with Global OSC switched on; the ports are in the README.

Download: https://github.com/acklin83/ORC/releases/latest
Manual: https://acklin83.github.io/ORC/

If you work in REAPER: my extension Rea-Sixty has the same view built in and takes the UF1 over from ORC while REAPER runs.

If something doesn't work, open an issue on GitHub or reply here.

Best,
Frank

Happy Fireface UFX+, Octamic XTC and M-32 Pro user.
http://www.stoersender-studio.ch

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

Very interesting. I would love to see a short video of the UF1 in action with TotalMix FX, as we do not have an UF1.

Regards,
Audio AG Support

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

Hi!

Sorry for the wait - here it is:
ORC UF1 Demo

Best,
Frank

Happy Fireface UFX+, Octamic XTC and M-32 Pro user.
http://www.stoersender-studio.ch

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

Very nice!! I will reccomend this for a Sticky post.

Regards,
Audio AG Support

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

Fantastic stuff, my hat's off to you Frank!  I've been following all your Rea-Sixty activity, and it's pushing me over to learning Reaper.  But what I'm wondering is for those of us with a UF8, whether this "ORC" can also include the UF8 RME features you've incorporated into Rea-Sixty, but without having to involve Reaper?  Now that would be exactly what I need - I mix my live 7 piece band with TotalMix (RME UFX+) and an SSL UF8 for the physical faders - but currently I only have the basic TotalMix control set up with Mackie protocol.  Your killer OSC implementation is so much more capable, and a major thing I lack is dedicated output selection like you've set up here on the ORC/UF1.  So can this be grown to also include the UF8?  If so, I'm off to pick up a UF1 !!

Thanks, Dave

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

Hi Dave

Glad you like it!
Yes, UF8 support is planned. No ETA yet.

Best,
Frank

Happy Fireface UFX+, Octamic XTC and M-32 Pro user.
http://www.stoersender-studio.ch

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

ORC 1.3.0 is out, and it drives the UF8 now, with or without a UF1, no DAW needed.

Dave, this one's for you: the UF8 shows eight TotalMix channels of a row on its faders, with gain or pan on the V-Pots, solo, mute and select. SEND/PLUG-IN 1-6 pick the submix in the order of TotalMix' control room (Phones 1-4, Main B, Main), and the colour bar on each strip says which submix the fader writes to. The nav cross steps rows and submixes, and its centre key shows or hides the TotalMix window. PLUG-IN puts the selected channel's EQ, dynamics, low cut, reverb or echo on the V-Pots. The CHANNEL encoder is Main volume, and while you turn it Main sits on strip 8. With a UF1 next to it both work on one selection, and the UF1 always stays on TotalMix.

The soft keys above the strips run the same soft-key banks as the UF1: snapshots, layouts, or keys you set up yourself.

And since I had the UF8 open anyway, I went all the way: LAYER 2 turns it into a dimmer desk for Philips Hue lamps (brightness on the faders, colour on the V-Pots, scenes on the soft keys), LAYER 3 drives DynaMount robotic mic stands, with presets for where every stand goes. And OBS scenes can sit on a soft-key bank, on the UF1 too. LAYER 1 takes you back to TotalMix.

Download: https://github.com/acklin83/ORC/releases/tag/v1.3.0
Manual: https://acklin83.github.io/ORC/

Best,
Frank

Happy Fireface UFX+, Octamic XTC and M-32 Pro user.
http://www.stoersender-studio.ch

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

ORC 1.5.0 is out and includes MoreMe: headphone mixes on phones.

Switch it on in ORC, and every musician opens a web page on their phone or tablet, picks one of Phones 1-4 and mixes their own headphones: level, pan, mute and solo of every source, plus the mix's master. Names and colours come straight from TotalMix, and a channel you hide in the TotalMix layout goes from the phones too. Nothing to install on the phones. Address, PIN and a QR code are in ORC's menu.

It also works without a UF1 or UF8 connected, just a Mac and an RME interface. With a reverse proxy and HTTPS you can put it on your own domain, like phones.yourstudio.com, so clients will think you're really sophisticated (before they go and ruin their own headphone mixes.)
The page speaks German, English, French, Italian and Rumantsch, and Klingon if you pick it by hand.

Smaller things:
- V-Pot speed, one per surface.
- Each surface can be switched off in ORC, if you'd rather leave the UF8 to something else.
- Linking two channels to a stereo pair in TotalMix now shows on the surfaces right away, and unlinking brings the right channel back with its level.

Download: https://github.com/acklin83/ORC/releases/tag/v1.5.0
MoreMe setup: https://acklin83.github.io/ORC/#moreme

Best,
Frank

Happy Fireface UFX+, Octamic XTC and M-32 Pro user.
http://www.stoersender-studio.ch

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

Oh WOW, this is just SPECTACULAR!  Looks like I'll be able to ditch the old Mackie protocol and SSL 360 and gain additional functionality - can't wait to dive in.  Thank you so much !!

And SSL keeps benefiting from your work - I'm sure lots of folks are picking up UF8s, UF1s, and UC1s since you've supercharged them :-)

Dave

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

OK, I've been diving in and now have a pretty good understanding of ORC on the UF8. And yes, it is FANTASTIC.  Of course, now that I've learned what it can do, I have a number of requests for some additions and enhancements.  But I'm going to put those in a separate follow-up post for Frank's consideration.

But an observation - when I initially got ORC working, I was confused due my prior UF8 experience with TotalMix being based on using the Mackie protocol over MIDI.  The way that is mechanized, EVERY change from the UF8 is mirrored on the TotalMix computer - so when you select an output/submix on the UF8, the same output is selected on the computer, and vice versa.  But with ORC, that doesn't happen; you can have the UF8 focused on 1 output/submix, while TotalMix on the computer remains focused on a different output/submix. Initially I thought ORC was broken, but turns out this is WAY MORE FLEXIBLE not having the output selections of the UF8 mirrored on the computer.  It just took a few minutes scratching my head to sort this out.

Thanks - stay tuned for my shameless enhancement requests!

Dave

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

OK, most people who are candidates for ORC are studio-based, and it is ready to go for that, especially if you have both a UF8 and a UF1.  However, I am using my RME Fireface UFX+ and TotalMix to run sound for a 7 piece performing combo, I'm both the keyboard player and the sound guy.  I needed something like the UF8 because touch screens and a mouse weren't working for me, I need the physical faders.  We've got a pretty elaborate setup, a stereo FOH, a subwoofer, a stereo monitor for me, an in-ear stereo monitor, and 4 individual mono monitor mixes to wedges.  I'm trying to gain as much functionality as I can with the UF8 by itself.  I also use Live Professor to utilize plugins, which means I'm using loads of virtual outputs and LoopBack, so having all the MADI channels is super-beneficial - but it also means my TotalMix is big and unwieldy!

In the live environment, I need a surefire way to know what submix I'm on, mainly leaving TotalMix focused on the MAIN output but still occasionally needing to select other outputs.

So my #1 request for ORC is a more direct way to select an output/submix.

From what I've been able to discern, there are 3 ways in ORC currently to select a submix:
- 1. Step through them with the L/R Nav arrows - works, but with so many outputs, serially stepping is time consuming.
- 2. Step down to the Output row via the Up/Down Nav arrows, step by 8 with the Bank buttons to the desired output, and SELect the channel, then Step back to Row 2 or 1 - still too much work.
- 3. If the output you want is one of the "control room submixes", the existing mechanization is excellent - you push one of the 1-6 SEND/PLUGIN buttons and you're there, without leaving Rows 1 or 2 - plus there's a nice reassuring illuminated button always telling you that Submix is in focus.  The problem is, that only currently works for 6 particular submixes if they're assigned to Main, Speaker B, or Headphones 1-4 within TotalMix.

My request is to augment the current method #3 to be able to have ANY 8 submixes (stereo or mono) assigned to the 8 SEND/PLUGIN buttons.
    - Have a Setting that swaps between the current "Control Room Submixes", and this "Assignable Submix" mechanization
    - Have a means to assign an output/submix to any of the 8 selection buttons

One mechanization could be to select the desired submix (sereo or mono) via method 1 or 2 above, SELect that Output, and then hold the (unused) Channel button followed by the desired SEND/PLUGIN button.  It could be done within the Settings similar to how DAW Inputs and Outputs are chosen from the list of those provided by the RME interface.  But I wouldn't care HOW it's done, as long as there's a way to match an output/submix with each of the 8 buttons.
    - The result is 8 output submixes are quickly selectable, and there's a clear visual cue when the TotalMix focus is on any of those.

ORC Request #2
I have my stereo monitor assigned as the Cue/PFL channel pair.  Normally I have the CUE selected on the Main (FOH) output, so I'm hearing a mirror of the FOH speakers. But I want to be able to temporarily select CUE on other various outputs, ideally via the UF8.

- ORC doesn't currently seem to have any TotalMix Cue selection capability, so at a minimum I'd need the basic 2-way Cue selection capability set up to mirror TotalMix.  Perhaps that can be provided as an assignable action, that then works on the currently assigned Output.  But my Cue Selection needs are typically for the same handful of outputs I also want the pushbutton selection feature above, so I'm imagining a related mechanization.

- If the above "Assignable Submix" mechanization is achievable, one Cue Selection mechanization might be that any subsequent selection of an already selected output/submix toggles Cue on/off, with a color change to the button illumination indicating CUE was selected (or not).  But just having the ability to have Cue Selection assignable action is the basic request.

If I've mis-represented anything here, my apology, there's a lot I've had to learn, and may have some incomplete understanding of things.  As always, thanks for your consideration !!

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

ORC 1.6.0 is out.

Dave, both your requests are in. Hope you can take the UF8 on the road now - but please test it thoroughly, I wouldn't wanna f* up one of your live shows!

Your #1: each of the 8 SEND/PLUG-IN keys can now be any output, stereo or mono. You set them in ORC's settings, page UF8, from a list of what TotalMix shows. No switch between modes needed: out of the box they're the control room keys you know, change only the ones you want. The key of the submix you're on stays lit. If you need more than 8, a soft-key bank can hold 8 more outputs, with their names from TotalMix.

Your #2: SOLO on an output is now its Cue. And SHIFT plus one of those SEND/PLUG-IN keys (or soft-keys) cues that output without leaving the submix you're on. The key turns yellow while it's cued, press again to take it off. The UF1 does SOLO the same way.

Everything else in this one:

MoreMe has performers now. Each musician gets their own link and QR code, with their own output, their own faders and only what you allow them to change. You can give them EQ and dynamics on their own headphones, and on channels if you really want to, which is off until you open it. That all happens in Studio Control, a new page in ORC.
BTW - That's the same functionality that other people might want to sell you for a fee... This is free and Open-Source.

ORC's settings window is new as well.

Smaller things:
- The UF8 and the UF1 can each show a different soft-key bank.
- UF8 meters show left and right apart on stereo channels.
- A new action links Main B's volume to Main.
- A channel you hide in TotalMix now leaves the surfaces a few seconds later.

If you also run Rea-Sixty, update it to 0.9.0.

Download: https://github.com/acklin83/ORC/releases/tag/v1.6.0
Cue: https://acklin83.github.io/ORC/#cue
MoreMe: https://acklin83.github.io/ORC/#moreme

Best,
Frank

Happy Fireface UFX+, Octamic XTC and M-32 Pro user.
http://www.stoersender-studio.ch

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

ORC 1.6.1 is out, and it runs on Windows now.

Windows 11, or Windows 10 version 1903 or later, 64-bit. UF1, UF8 and MoreMe are all there. It sits in the notification area instead of the menu bar, so look behind the little arrow if you can't find it.

Three things you'll run into on Windows:

ORC isn't code-signed. SmartScreen warns about the installer: More info, then Run anyway. Smart App Control refuses it until you switch that off.

The surfaces need a USB driver. Settings, General, USB driver, Install, then unplug them and plug them back in. While that driver is on, SSL 360 can't see them. Remove undoes it.

In TotalMix, Send changes under OSC Details has to be on. Without it ORC connects and shows no channels.

This also fixes MoreMe showing no channels when every channel is in the TotalMix layout, on the Mac too. My own layout hides most outputs, so I never ran into it.

With Rea-Sixty on Windows, use 0.9.1. and REAPER takes the surfaces when it starts and gives them back when it quits, same as on the Mac.

Download: https://github.com/acklin83/ORC/releases/tag/v1.6.1
Windows part of the manual: https://acklin83.github.io/ORC/#windows

Best,
Frank

Happy Fireface UFX+, Octamic XTC and M-32 Pro user.
http://www.stoersender-studio.ch

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

It's official, my brain just exploded!

Frank, you’re killing me with JOY!  The word AMAZING doesn’t quite capture it all.

As far as I can tell, the SEND/PLUGIN button assignment is perfect!  Thank you so much.  However, I am now noting prior behavior I think could be improved - when I pick an assigned Submix via SEND/PLUGIN, the corresponding Output row SELect button is not updated/mirrored, it stays on whatever output was previously selected – when I go to the output row, the lit SEL button doesn’t match what is actually selected.  It works correctly the other way - selecting one of the assigned outputs via SELect in the output row lights the matching SEND/PLUGIN button.

The “Solo selects Cue” mech also works perfectly, and with the color implementation on the SEND/PLUGIN keys I always know what’s what. And the "Shift/Solo" background Cue selection is brilliant - another way I can avoid accessing the Output Row.  So Happy!

Playing with the new Submix selection reminded me ORC will only let you build those submixes when they are Not Hidden in TotalMix on the computer (Options/Channel Layout).  If you’re on the Output row on the UF8, or you're assigning the SEND/PLUGIN keys in Settings, you’ll notice pretty quickly those outputs are not there.  And it’s easy enough to go to the computer and unhide these particular outputs, and make sure they are unhidden in all Layouts.  But if you use the ALL button on the computer to show channels that are officially “hidden”,  that button currently doesn't impact the UF8 - I got suckered into that scenario a couple times.  Anyway, it might warrant a note in the manual to stress needing to not have those assigned Output channels HIDDEN.

I’m now going to dump on you a bunch of random comments, a lot of nits here, but sorry I’m a retired engineer, I can’t help myself.  If nothing ever changes, this version of ORC does everything I need!  So please pick and choose what if anything you might want to address.

1)    The 360 button light is Always On, rather than toggling along with display of the settings window.

2)    The font size of the display “banner” (showing the current Submix on Rows 2 & 3) is TINY – any way to make it any bigger? Probably not, but figured I'd ask.

3)    I use Layouts a lot, so I was super happy ORC lets me select Layouts from the UF8.  But right now, it is set up with 8 Layouts, while TotalMix only has 6 available Layouts.  I'm fairly sure that's how it works - I would love 2 additional layouts, but I don’t think they’re there.  Coincidentally, ORC doesn’t currently make use of the ALL and SUBMIX buttons in the Layout section, (no response in ORC, and no UF8 buttons assigned).  So, a logical update would be to change Layouts 7 & 8 selections to ALL and SUBMIX selections, if that’s possible.  Or perhaps they could be made available as assignable actions.  As mentioned earlier, the channels shown/hidden by those buttons are NOT reflected on the UF8 by ORC, so implementing them might be messy or full of unintended consequences. At the bare minimum, ORC ought to only refer to and support 6 Layouts, if that’s all there are.

And I'm noting that on my setup, selecting Layouts that add additional hidden channels can take 5-7 seconds to show up on the UF8, while Layouts that bring back hidden channels seem to be pretty much instantaneous.

4)    Can the ORC channel names follow the “Names” button - i.e., toggle between User and Default names as is done on the computer?  That’s another one I use a lot.  Maybe it could be an assignable action?  Even better, If the display would accommodate it, I would love a selection to display BOTH the user name and the default name, but given the limited display size, that's probably a no.

5)    How can I Pan, on channels AN1-12 (where the V-POT is Gain)?  Obvious solution would be the PAN pushbutton could enable this.  Or maybe the VPOT Pushbutton alternate between Gain and Pan?  Any way, just a nice-to-have.

6)    You’ve added a lot of cool capability on Layers 2 and 3, but I personally won’t use those layers.  For live use I would prefer them to be Row Selections 1, 2, & 3, with the button illumination giving clear feedback of which Row is called up. Possibly a Setting alternative selection? Or maybe Row selection could be assignable actions, for something like the Quick keys.

7)    Is the UF8 aware of when 2 outputs are “mirrored”?  On the computer, selecting one output automatically highlights any others that are mirrored.  The obvious choice is to illuminate parallel SELect buttons, but maybe some other method?


All done.  Thanks, Frank!  Please understand, I will never fully be able to express my appreciation for the work you’ve done matching this to my specific “selfish” needs.  I’m hoping other RME/TotalMix users all rush out and purchase UF8’s to experience the crazy amount of sophistication and control you’ve enabled here. 

We play the last 3 weekends in November, so I'll be giving ORC a thorough road test :-)

Dave

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

Hi Dave

Great list, and no apology needed, retired engineers find the good stuff. ORC 1.6.3 is out and most of it is in.

SEL not following the submix: fixed. Picking a submix with SEND/PLUG-IN now moves the SEL on the output row too. Same for the nav arrows and the submix soft keys.

Hidden outputs: I can't make those show up, and you're right that ALL on the computer doesn't reach ORC. The note is in the manual now. Up to rme to add it I guess.

1) 360 light: fixed. Bright while the settings window is open, dim when it's closed.

2) Banner font: not possible. It's drawn by the SSL firmware, we can only write text but not format it. The lit SEND/PLUG-IN key is the better cue on stage anyway.

3) Layouts: you were right, TotalMix has 8 snapshots but only 6 layouts. I went by TotalMix' own settings file, which lists 8 names. Fixed, keys 7 and 8 stay empty now.
ALL and SUBMIX: not possible. RME's OSC table has no command for them.
The 5-7 seconds: better when you load the layout from the UF8. ORC now asks TotalMix again right after the load. If you change the layout on the computer it still takes a few seconds, because TotalMix doesn't tell ORC about it.

4) Names button: not possible, sorry. TotalMix sends ORC one name per channel. It doesn't change with the button, and there's no OSC command for the button. Showing both names won't fit either, the strip has 8 characters.

5) Pan on AN1-12: done, with your first idea. The PAN key switches the V-Pots between gain and pan on those channels, and it's lit while they're on pan.

Heads up, this one is new and you didn't ask for it: a push on a V-Pot on gain used to set 0 dB. It now switches 48V on and off, if that channel has it, otherwise it does nothing. The line under the fader reads "Gain 48V" while it's on. A push on pan still centres. Please try this before a show, so a stray push doesn't surprise you with something sensitive plugged in.

6) Rows on the Layer keys: LAYER stays as it is, but there are four new actions for the input, playback, output and FX rows. Put them on QUICK 1-3 or any of the other assignable keys on the UF8 page, and the lamp tells you which row is up.

7) Mirrored outputs: not possible. RME's OSC table has nothing for mirroring, so ORC can't know about it. Main and Main B do light together now when Link A/B is on in TotalMix. Faders still write to the one submix you picked.

Have fun on those three weekends, and tell me if anything acts up.

Download: https://github.com/acklin83/ORC/releases/tag/v1.6.3
Manual: https://acklin83.github.io/ORC/

Best,
Frank

Happy Fireface UFX+, Octamic XTC and M-32 Pro user.
http://www.stoersender-studio.ch

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

Thanks Frank - and YES, everything works smoothly, and now covers every function that I need, and some I hadn't realized I needed - I love it!  Adding the phantom power switching and status is a big bonus. And I really appreciate you taking the time to provide the background on each item.

The Names button is a pet peeve of mine that I've pestered RME about before - if they would only use the extra bit of channel strip real estate to provide both user and default names, it would be so much easier to deal with a complex TotalMix setup like mine where dozens of channels are in use in various chains behind the scenes.  And you could get rid of the Names button altogether!  Oh well, I'll have to keep bothering them :-)

I'll pass on anything unusual that I see, but I really think this is the final product for me, it's amazing what a jump in real-time control and functionality ORC provides for the UF8 in live use.  Thanks again!

All the best,
Dave

Re: Open Remote Control (ORC): SSL UF1/UF8 Support and Phones Mixer

Glad to hear!
Maybe RME will add something for original names in their OSC?

Have fun,
Frank

Happy Fireface UFX+, Octamic XTC and M-32 Pro user.
http://www.stoersender-studio.ch