1 Topic by mika1976 (edited by mika1976 2013-10-09 17:31:43)

  • Registered: 2007-06-09
  • Posts: 23

Topic: HDSP 9632 : Sub 15 Pol Extension

Hi,
I bought a HDSP 9632 and the symmetrical XLR breakout cable... my DAW is in another room and speaker cables are a little too thick for the door...  better would be one extension cable for the breakout cable... HDSP 9532 - sub15 extension - breakout cable...

can I use a Sub15 Extension Cable without any disadvantages?

like this:
http://www.amazon.de/InLine-S-VGA-PREMI … m_sbs_ce_4
or
http://www.amazon.de/Wentronic-Monitork … l+15+polig

both would do fine?

thanks for helping out!

lg m

2 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,432

Re: HDSP 9632 : Sub 15 Pol Extension

It works - not. Standard D-sub cable do not have shieldings for the internal wires, and those VGA cables have but on wrong combinations of the wires. There is some crosstalk and problems to be expected.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2007-06-09
  • Posts: 23

Re: HDSP 9632 : Sub 15 Pol Extension

Dear Matthias,
is there another solution? What extension works?
Thanks,
Mika

4 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,432

Re: HDSP 9632 : Sub 15 Pol Extension

I am not aware of any solution than soldering it yourself.

Regards
Matthias Carstens
RME

MC's Website

5 Reply by mika1976 (edited by mika1976 2013-10-10 09:30:01)

  • Registered: 2007-06-09
  • Posts: 23

Re: HDSP 9632 : Sub 15 Pol Extension

Please give me a hint, which cables and components I need.
I'm a RME user for 6 years and I finally need some help! Thank you very much.

(This Babyface 15pol won't work? http://www.synthax.de/de/rme-accessories/bf-ext30.html)

6 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,432

Re: HDSP 9632 : Sub 15 Pol Extension

Won't work. You need thin balanced multicore cable and solder it according to the pin layout found in the card's manual.

Regards
Matthias Carstens
RME

MC's Website