• Registered: 2011-04-23
  • Posts: 2

Topic: no input from FF800 iinto Raydat

Well after having  new drives installed  in my Mac Pro  I finally got everything back together I am running a Yamaha 02R with the ADATs going into a FF800 I have input and out put at the FF mixer but I cannot get anything into the HDSPe card in the way of signal- when I move the optical cable from one input port to another on the HDSPE card it show the proper sync and rate, but I do not  get signal- all drivers and firmware are up to date- If I plug the ADATs from the mixer directly into the HDSPe card I get input signal- I really want to use the clock on the FF 800 and my routing was as I first described before the HD crashed on my MAC - any ideas?

2 Reply by Randyman... (edited by Randyman... 2011-11-20 00:47:27)

  • From: Houston, TX
  • Registered: 2007-05-11
  • Posts: 1,198

Re: no input from FF800 iinto Raydat

Sounds like a Totalmix routing issue on the FF800 to me (send FF800 ADAT Inputs back to FF800 ADAT Outputs which then feed your Raydat ADAT Inputs).  Do you actually see the FF800's ADAT Outputs leaving the FF Mixer?

Are the ADAT I/O's configured correctly on the FF800 (as in: not for SPDIF)?

cool

MADIface-XT+ARC / 3x HDSP MADI / ADI648
2x SSL Alphalink MADI AX
2x Multiface / 2x Digiface /2x ADI8