• Registered: 2021-02-06
  • Posts: 2

Topic: No audio received Digiface Dante MADI port @ 192kHz

When I switch the Digiface Dante to 192 kHz the input signal is lost (test with Ferrofish A32 MADI, Analog Ch 8 in -> MADI 8 out)

Sync is fine, FF A32 shows analog input signal and digital output signal.
Switching back to 96 or 48 kHz solves the problem.

Any thoughts?

2 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,582

Re: No audio received Digiface Dante MADI port @ 192kHz

Feed the DF Dante's MADI with itself (loopback) to verify it works at 192 kHz. Then find the configuration error in the A32...

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2021-02-06
  • Posts: 2

Re: No audio received Digiface Dante MADI port @ 192kHz

Thanks for the reply MC.

Problem solved. (loopback worked fine)

FF A32 analog inputs (17-32) had to be used,  (1-16 use the Optical MADI I/O, 17-32 the BNC in 192kHz SMUX/4 mode)

BR Martijn