1 Topic by Hylton (edited by Hylton 2024-10-28 20:19:51)

  • Registered: 2015-10-29
  • Posts: 46

Topic: 12mic AuxDevice setup with UFXIII

Hi all, I am finding this harder to do than than it probably should be.
I am really excited about my new UFXIII and 12Mic setup. I am trying to set the 12Mic up as an Aux device in TotalMix.
I can't seem to get the 12Mic to appear as a Midi. In the Mixer settings of TM, I get RME UFX ports 1-4. Which one is Madi?
I have the two units connected via coax as well as AVB. I can control the 12mic with the RME Connector as well as the http but can't seem to control it via TM. in the Aux Device setup, only the Octamic XTC appears not the 12mic.

Is there a webpage or YouTube somewhere which explains this step by step please?

Thanks all......I really do appreciate RME and this Forum

2 Reply by ramses (edited by ramses 2024-10-28 20:33:25)

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,192

Re: 12mic AuxDevice setup with UFXIII

> I can't seem to get the 12Mic to appear as a Midi. In the Mixer settings of TM, I get RME UFX ports 1-4. Which one is Madi?

This has been explained already in another forum thread. In short:

For Auxdevice you should use MIDI port 3 for MADI optical. This is documented in the manual.

UFX III Midi Port 1+2 - MIDI front / back
UFX III Midi Port 3 - midi over madi optical
UFX III Midi Port 4 - midi over madi coaxial

> I have the two units connected via coax as well as AVB.

I recommend you to start with MADI / Auxdevice 1st to get at least something going.

> I can control the 12mic with the RME Connector as well as the http
> but can't seem to control it via TM. in the Aux Device setup, only the Octamic XTC appears not the 12mic.

Either use Auxdevice or RME Connector, using two different types of remot control is not possible.

I need some time to find the proper threads .. but maybe this information is already sufficient.

How to setup Octamic XTC and 12Mic you can see in my new documentation of my setup, see this blogarticle.
See the screenshots in Tabs driver settings and regarding Auxdevice in the Tab TotalMix FX:
https://www.tonstudio-forum.de/blog/ent … tup-en-de/

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Registered: 2015-10-29
  • Posts: 46

Re: 12mic AuxDevice setup with UFXIII

Thank you Ramses, checking it all out again now.

4 Reply by ramses (edited by ramses 2024-10-28 20:40:55)

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,192

Re: 12mic AuxDevice setup with UFXIII

Use extended forum search
Search Term: Auxdevice AND 12Mic
Username: ramses

A few postings with this topic

https://forum.rme-audio.de/viewtopic.ph … 23#p226023
https://forum.rme-audio.de/viewtopic.ph … 54#p224354
https://forum.rme-audio.de/viewtopic.ph … 41#p224041
https://forum.rme-audio.de/viewtopic.ph … 30#p223830

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Registered: 2015-10-29
  • Posts: 46

Re: 12mic AuxDevice setup with UFXIII

Thanks again. Yes lots to read.....Appreciate it