1 Topic by mc887382 (edited by mc887382 2015-03-04 09:52:27)

  • Registered: 2015-03-04
  • Posts: 10

Topic: HDSP 9632 and Win 7 64 SP1

Hi
I'm just ready to buy a second hand HDSP 9632.(my first RME product)
I'm using Cubase Pro 8,Wavelab 8.5 and Pro Tools 11 in Win 7 64 SP1.
Are my specs correct to have this card? Should I expect any issues?

TIA

  • vinark
  • DAW Mastermind
  • Offline
  • Registered: 2009-06-05
  • Posts: 2,863

Re: HDSP 9632 and Win 7 64 SP1

Should work 100% ok if you have spare PCI slot!

Vincent, Amsterdam
https://soundcloud.com/thesecretworld
BFpro fs, 2X HDSP9652 ADI-8AE, 2X HDSP9632
  • Registered: 2015-03-04
  • Posts: 10

Re: HDSP 9632 and Win 7 64 SP1

Sounds great!

Thanks again

4 Reply by mc887382 (edited by mc887382 2015-03-04 23:12:35)

  • Registered: 2015-03-04
  • Posts: 10

Re: HDSP 9632 and Win 7 64 SP1

Well I have it installed by now but the firmware update fails!.....HDSP 9632 rev 1.0.7
Win 7 64 SP1 drivers installed: dc 575,hdsp win 406,fut wdm.
Any ideas?

The card appears like working fine in the device manager.


TIA

5 Reply by mc887382 (edited by mc887382 2015-03-04 23:20:15)

  • Registered: 2015-03-04
  • Posts: 10

Re: HDSP 9632 and Win 7 64 SP1

The Hammerfall DSP settings says:
"warning  RME Hamerfall DSP hardware mismatch
the driver requires a new interface firmware...
The Flash update tools says:
"Card 1  Hw revision 152
...erasing sector 1.....
programming status Failed

  • Registered: 2015-03-04
  • Posts: 10

Re: HDSP 9632 and Win 7 64 SP1

OK I finally could update the firmware to 154 moving the card to a 32 bit PC (Win 7 Sp1 32).
Moved back to my main 64 PC everything seems to work fine.

Cheers