Topic: HDSPe MADI fx MIDI Control Output
In my studio, I use an HDSPe MADI fx. To facilitate instant switching of the control room monitors between the main output and the 4 cue outputs, I built a small hardware box with 5 LED pushbutton switches and USB output. Per the user manual, I set the switches up to output MIDI notes as follows (decimal):
Main Output: 62
Phones 1: 63
Phones 2: 64
Phones 3: 65
Phones 4: 66
The switching of the Totalmix outputs works very well.
I would also like the LED's to light on each switch when it is pushed. I set the switch LED's to light when the box receives the same MIDI note numbers back as shown above. That doesn't seem to work.
I tried Bome's and MIDI Ox to intercept what Totalmix sends back out as confirmation after switching the output, but there is a flurry of different messages that are difficult to interpret. Can you guys tell me what MIDI note numbers are being sent out after switching these outputs?
I searched the manual and the forums before posting, so if this information is already published somewhere please point me to the location.
Thank you!