• Registered: 2017-03-13
  • Posts: 1

Topic: RME AIO vs. Raydat + ADI 2

Hi RME fans,

I´m looking for an advice from more experienced guys.

I´m going to upgrade my studio where I´m using Babyface right now.
I want to go the way where CPU will efficiently be used, low latency and conversion quality as well.
I don´t need much inputs right now and when I will one time, I´ll purchase another RME inputs.

Please, gimme advice on which setup to choose.

PC setup is intel  i7 6 core Haswell 3,6Ghz, 16gb DDR4 RAM, SSDs, X99 Asus mobo.

What would you consider as the best option for requirements mentioned above?

RME AIO or Raydat + ADI 2 or RME UCX.

Thx.

  • vinark
  • DAW Mastermind
  • Offline
  • Registered: 2009-06-05
  • Posts: 2,772

Re: RME AIO vs. Raydat + ADI 2

What are you hoping to get from the update? What is wrong or don't you like or do you need more from the babyface?

Vincent, Amsterdam
https://soundcloud.com/thesecretworld
BFpro fs, 2X HDSP9652 ADI-8AE, 2X HDSP9632

3 Reply by ramses (edited by ramses 2017-03-13 21:24:39)

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,173

Re: RME AIO vs. Raydat + ADI 2

RayDAT is a pure digital card.
You would need a preamp not only with inputs but also with analog outputs.
Some people buy the RayDAT but then don't further invest into RME products to save money.
Then you only have the rock solid RME devices: driver quality, TotalyMix FX, DigiCheck,
but not i.e. the quality of RME preamps.

The AIO is quite expensive, if you would have to expand it with additional channels.

Then you are IMHO better of to directly get the UCX. The UCX has some nice features ...
Autoset, FX chip in board, USB and Firewire, etc ...

An overview over these devices you can get here:
http://www.tonstudio-forum.de/blog/inde … B-MADIfac/

The Excel file with the comparison sheet is in german, but as its technical data, it should be readable by you.

PCIe cards have certain advantages for very big projects, but if you look at the pure numbers, the excellent ASIO USB/FW drivers from RME come very close to PCIe.

http://www.tonstudio-forum.de/blog/inde … 8-RME-UFX/

https://dl.dropboxusercontent.com/u/96192996/tonstudio-forum.de/blog/RME%20UFX%2B/UFX%2B_UFX_RayDAT-Latencies.xlsx.jpg

If you have more budget, then perhaps go for UFX II as the devices have been much enhanced in different ways, to be read here in this article as well: http://www.tonstudio-forum.de/blog/inde … 8-RME-UFX/

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14