1 Topic by giladxxx (edited by giladxxx 2017-03-16 18:22:41)

  • Registered: 2017-03-16
  • Posts: 12

Topic: 1/2 Input channels totalmix

hi,

I am working with Ableton (if need to know)  and I have two input channels (3 and 4) from my babyface pro out of the same synth. both of them are set on mono. the problem is that I hear from both of the channels these to lines together.

Other Question,
How can I replace the inputs 1/2 , that I will be able to connect instrumet and not mic?

Many thanks
G

2 Reply by ramses (edited by ramses 2017-03-16 18:21:08)

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,209

Re: 1/2 Input channels totalmix

Either RTFM or WTFYV (Watch the friendly Youtube Video) wink

Input channel -> Tool symbol ... then you'll see it ...

Regarding Videos .. here the very good ones from RME, highly recommended:
http://www.tonstudio-forum.de/blog/inde … al-Videos/

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14

3 Reply by giladxxx (edited by giladxxx 2017-03-16 18:50:05)

  • Registered: 2017-03-16
  • Posts: 12

Re: 1/2 Input channels totalmix

Hi

thanks for your response!

But it doesn't work for me. first in the tool symbol I have "Pad" and not "Instr". Anyway, I had try it but still only 3/4 inputs show up in my daw and also in the Totalmix display sad

I just edited my first message for one more question.

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,209

Re: 1/2 Input channels totalmix

Which RME interface do you have ?

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14

5 Reply by giladxxx (edited by giladxxx 2017-03-16 20:23:13)

  • Registered: 2017-03-16
  • Posts: 12

Re: 1/2 Input channels totalmix

babyface pro.

after another check I think the problem is with the synth output setting. becouse I connected the input 2 to the headphones out and that work.
So I stay with my second question
I still can hear input 4 also in 3.

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,209

Re: 1/2 Input channels totalmix

The handbook clearly states that IN 3/4 are line/instrument inputs.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14

7 Reply by giladxxx (edited by giladxxx 2017-03-17 14:23:12)

  • Registered: 2017-03-16
  • Posts: 12

Re: 1/2 Input channels totalmix

ramses wrote:

The handbook clearly states that IN 3/4 are line/instrument inputs.

I sent guitar to input 4 and the bass to input 3. Both on mono.

now I am hearing from input 3 = the bass and the guitar.

And from input 4- only the guitar

Edit:
Ok solve! smile
the problem was the synth settings.
And that what happen with two new devices in the same time.

Thanks a lot!