• Registered: 2017-04-15
  • Posts: 3

Topic: Mono input -> Panned in TotalMix Fx -> Stereo Recording in DAW: how ??

Hi,

I have been using TotalMix Fx for a few weeks now and I am now tweaking the EQ and Dynamics Fxs which work really well !

All my hardware inputs are mono and I use also the Pan functionality in TotalMix, on the Hardware inputs mono tracks, so I get a really good mix in the end.

Now that it is time to record the result in my DAW, but I am stuck in getting the panning, because the inputs available in my DAW are the hardware inputs, and though they are post EQ+D they are obviously without the panning because the hardware inputs are mono.

How can I get each the stereo outputs that TotalMix is sending in the Main Mix ?

Thank you for your help.
Best regards

Max

  • Registered: 2014-05-11
  • Posts: 30

Re: Mono input -> Panned in TotalMix Fx -> Stereo Recording in DAW: how ??

which RME interface you are using?

with Loopback you can send the outputs back to your DAW Software

  • Registered: 2017-04-15
  • Posts: 3

Re: Mono input -> Panned in TotalMix Fx -> Stereo Recording in DAW: how ??

Ufx.

The hardware outputs, right ?

I have no hardware outputs.

Only mono inputs that are stereoized by TotalMix Fx but still appear as mono in the DAW, though post Eq+D.

  • Registered: 2014-05-11
  • Posts: 30

Re: Mono input -> Panned in TotalMix Fx -> Stereo Recording in DAW: how ??

third row in TM are the hardware outputs from the UFX

with loopback you are recording the HW outputs - say route your inputs you want to record to the HW outputs in TM say ADAT 1-2 - any outputs are possible - and record this  (sure you must tell your recording software which outputs you wish to record (loopback), so in the example above ADAT 1-2 are your recording inputs in the DAW software)

which software you are using?

hope that helps

  • Registered: 2017-04-15
  • Posts: 3

Re: Mono input -> Panned in TotalMix Fx -> Stereo Recording in DAW: how ??

Hi!

Yes it makes sense thank you !

I'll try that and post my result here.

I'm using Ableton Live.

Cheers

Max