• Registered: 2012-06-19
  • Posts: 8

Topic: UFX+ how to extend so that...

Dear all,
what is the best possible way to extend UFX+ so that this additional pannel contains:
-> not worse preamps
-> all those -10dB, +4dB, HiGain features for hardware outputs and
-> + 4dB, LoGain for hardware inputs
everything visible from one common Total FX.

I need mostly line-in/out ports.

thank you!
Tomek

2 Reply by ramses (edited by ramses 2017-11-03 22:17:41)

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 12,893

Re: UFX+ how to extend so that...

via MADI, check Octamic XTC

http://www.tonstudio-forum.de/blog/inde … BCber-MADI

XTC is the only preamp which can be remote controlled as so called AUX device .

All XTCs accessible via one TM FX session.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13
  • Registered: 2012-06-19
  • Posts: 8

Re: UFX+ how to extend so that...

ramses wrote:

via MADI, check Octamic XTC

Hi, thank you.
The problem is Octamic XTC has no outputs but headphone ones... sad or am I mistaken?
I need both in and outs (at least 8 line-in and 8 line-out.

Kr
Tomek

4 Reply by ramses (edited by ramses 2017-11-03 22:54:00)

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 12,893

Re: UFX+ how to extend so that...

true, see MADI devices on webpage

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13
  • Registered: 2012-06-19
  • Posts: 8

Re: UFX+ how to extend so that...

ramses wrote:

true, see MADI devices on webpage

Dear all,
do you have any knowledge around these 2 below? I am wondering which one to buy to extend UFX+
1). M-32 / M-16 DA/AD
2). ADI-8 QS

Any significant quality differences on AD/DA converters there between both? Regarding ADI-8 QS I have seen that MADI is "optional" - does it still usable when connecting with UFX+?
Anyway (does not matter 1 or 2) when connected to UFX+ via MADI some basic feture like levels and level faders work in TotalMix?

ADI-8 QS has both ins and outs so little bit more attractive for me however I am not sure about the quality..

kr
Tomek

  • From: France
  • Registered: 2014-02-01
  • Posts: 72

Re: UFX+ how to extend so that...

You could use another UFX+ to get an extra 8 analogue outputs (plus an extra 12 analogue inputs).