> This is what Quotation marks (") are for.
See how other ppl quote, which gives much better overview.
>I did it that way, I see the photos fine. Not sure what the issue is for you.
Neither its clickable, nor the URL can be marked for copy/paste.
>I make no assumptions but workclock is usually 1st goto maybe from habit.
>And yes the DA7's is locked in sync with the ff800 via adat lightpipe.
> I have 2 DA7's each one is locked to it's on FF800
Then you do not require WC.
The 2 FF800 will act master/slave (clocked i.e. via AES. Master, clock mode "internal", Slave, clock mode "AES")
Each of the Ramsa gets the clock via ADAT.
You need 2 ADAT cables per device:
- one for the direction to send audio to the FF800.
- one for the direction to receive clock and audio from the FF800 <--- and this needs to be in the locked state, which shows that they are linked.
Don't become confused ;-)
I think MC is going your direction with WC as you seem to "like" WC.
I tell you a potentially better alternative based on your information.
Most likely better quality and you do not have to fiddle around with BNC cables.
BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13