• Registered: 2013-01-29
  • Posts: 13

Topic: Talkback to main-out possible?

Hello.
I´ve setup a tiny project for vocal recording.

Actually the vocalist gets main out  (Analog 1/2) into a small mixer with headphones.
For me I use the Phones jacket at the Multiface II Box.
I declare Input 3 as Talback in the settings window.

So far so good. The Phones channel will receive the talkback mic (talkback button at phones channel) but the main out didn´t have a talkback option.

So did I have to overthink my routing?
Should I use Output 3/4 for the vocalist? E.g. I Assign Analog 3/4 outputs to Phones2 and at the software playback set fader for Analog 3/4 output with Analog 1/2 input.

And by the way, is it possible to control the talkback button via controller and not via mouseclick?

  • Registered: 2013-01-29
  • Posts: 13

Re: Talkback to main-out possible?

Hey, it‘s me again and find my own post and still have the question if it’s possible to route the talkback to the Main channel?

3 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: Talkback to main-out possible?

Tried to assign Input 3 also as Listenback?

Regards
Matthias Carstens
RME

MC's Website

4 Reply by burn4ever (edited by burn4ever 2018-01-25 07:24:01)

  • Registered: 2013-01-29
  • Posts: 13

Re: Talkback to main-out possible?

Right,
by clicking the spanner Icon at the Main and the Phones outputs (right, bottom channels) I only have the bright talkback sign on the phones channel.
So the basic question is if it´s possible to assign the talkback to the Main Out too?

5 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: Talkback to main-out possible?

????????

Listenback is set in the same dialog where you select the Talkback input.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2013-01-29
  • Posts: 13

Re: Talkback to main-out possible?

Maybe the screenshot makes it more clear.
At an Phones channel I can activate the talkback, at the Main not.
So how can I make the talkback available at the Main too?
http://burn4ever.de/temp/ttm-talkback.png

7 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: Talkback to main-out possible?

You can't, obviously. That's why I suggested to try Listenback.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2013-01-29
  • Posts: 13

Re: Talkback to main-out possible?

Okay, with Listenback I can assign this channel to every output.
But I´m missing the possibility to assign the toggle at the key commands like it´s possible with the talkback to activate and mute the channel.

9 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: Talkback to main-out possible?

Listenback is coupled to Talkback, so I don't understand your question.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2013-01-29
  • Posts: 13

Re: Talkback to main-out possible?

MC wrote:

Listenback is coupled to Talkback, so I don't understand your question.

Oh, sorry I don´t know that, just checked it only visually the assignment.