• Registered: 2008-04-09
  • Posts: 2

Topic: rme800 software settings and mixer do not open up upon firing up!

I have updated driver for Windows 10. But the Settings & Mixer do not load up when I power on my Fireface 800.
On my old Mac Pro, it loaded right away: the Settings Window and the old Mixer software. Has it moved to TotalMixFX?
If so, where is the Phantom 48V tick box I used to check in the Settings window. I used to also be able to tick off which microphone input I selected, 7-10.
Thank you for your help.

Intel Core i7-8700, 3.20GHz, 32 Ram 64 bit, Windows 10 Pro

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,705

Re: rme800 software settings and mixer do not open up upon firing up!

Which driver exactly did you install? What kind of FW connection is there? Does the red HOST LED turn off?

Regards
Daniel Fuchs
RME

Regards
Daniel Fuchs
RME

RME Support's Website

  • Registered: 2015-12-14
  • Posts: 8

Re: rme800 software settings and mixer do not open up upon firing up!

I'm having the same problem. I down loaded latest version, installed FW drivers, and installed SIIG 1394 IEEE PCIE card. Word Clock and ADAT, also SPDIF are on, but the HOST Light is ON.  Any help would be appreciated.  Windows 7 64 bit, Sonar X3e, 24GB Ram.  Also, I have Multiface connected, should I uninstall that?  In the Device Manager under Audio I have the analog and adat showing there.

4 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,444

Re: rme800 software settings and mixer do not open up upon firing up!

Multiface connected to what?

Regards
Matthias Carstens
RME

MC's Website