• Registered: 2015-05-06
  • Posts: 55

Topic: TMFX Routing Question

I Believe this is possible so thought i would ask before i try figure it out on my own to get some advice.

Trying to find a simple "Quicker" way to switch between my Main monitors and reference monitors in Total Mix FX without having to go into Ableton and change the output each time.

I have a RME UFX+

The main monitoring speakers EVE S208 are on output 1/2 XLR.

I have another pair of yamaha HS80 that are on output 3/4.

Is there any way to setup routing in TMFX so i can :

Mute 1/2 then Unmute 3/4 = yamhas are currently monitoring
Mute 3/4 then Unmute 1/2 = Eve are currently monitoring

Thanks

2 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: TMFX Routing Question

Speaker B? This question really puzzles me...

Regards
Matthias Carstens
RME

MC's Website

3 Reply by ramses (edited by ramses 2019-01-12 12:19:46)

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,208

Re: TMFX Routing Question

taccess wrote:

I Believe this is possible so thought i would ask before i try figure it out on my own to get some advice.

Trying to find a simple "Quicker" way to switch between my Main monitors and reference monitors in Total Mix FX without having to go into Ableton and change the output each time.

I have a RME UFX+

The main monitoring speakers EVE S208 are on output 1/2 XLR.

I have another pair of yamaha HS80 that are on output 3/4.

Is there any way to setup routing in TMFX so i can :

Mute 1/2 then Unmute 3/4 = yamhas are currently monitoring
Mute 3/4 then Unmute 1/2 = Eve are currently monitoring

Thanks

TM FX: click "Assign" Button. For "Main Out B" assign Analog 3/4, that's it wink

Search handbook for "speaker b" and you will find references in ch 25.4 and 25.10.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Registered: 2015-05-06
  • Posts: 55

Re: TMFX Routing Question

Really thats it
Thats why i came here
I will check manual also thankyou for the references and the help
I will try this in the morning

Thankyou

ramses wrote:
taccess wrote:

I Believe this is possible so thought i would ask before i try figure it out on my own to get some advice.

Trying to find a simple "Quicker" way to switch between my Main monitors and reference monitors in Total Mix FX without having to go into Ableton and change the output each time.

I have a RME UFX+

The main monitoring speakers EVE S208 are on output 1/2 XLR.

I have another pair of yamaha HS80 that are on output 3/4.

Is there any way to setup routing in TMFX so i can :

Mute 1/2 then Unmute 3/4 = yamhas are currently monitoring
Mute 3/4 then Unmute 1/2 = Eve are currently monitoring

Thanks

TM FX: click "Assign" Button. For "Main Out B" assign Analog 3/4, that's it wink

Search handbook for "speaker b" and you will find references in ch 25.4 and 25.10.