You are not logged in. Please login or register.
RME User Forum → MADI/AES Premium Line → RME ADI 648 error message
Hi all,
I had to move my gear to another room so had to reconnect and reset all my boards but now when I turn on the ADI-648 an error message appears (the red light lights up) and I'm not able to fix it, any suggestion?
Thank you, Franco
Check the MADI input signal/connection.
Yes, I did but the red light is still there :-(
I've tried even with another MADI cable I've for spare but the result is the same
Any other check I could do or you suggest to send it to some technical staff?
Thank you, Franco.
Connect MADI in and out directly on the 648 with clock mode internal. Red light?
Done. Red light still there.
I did several checks and configurations but it doesn't work...
Then the 648 must be defective. Check with your local disntributor for repair options.
Ok, thank you for your answers, I'm going to contact an italian distributor
Regards, Franco.
RME User Forum → MADI/AES Premium Line → RME ADI 648 error message
Powered by PunBB, supported by Informer Technologies, Inc.