Apologies if this has been requested before. I own a UFX+ which I use in conjunction with various mic pres and mixing consoles to record and broadcast classical music. I often have quite complex signal routing between many devices, analogue and digital.

It would be useful to be able to route test signals to the outputs of my UFX+ unit, straight from TotalMix. Maybe the oscillator (and its settings) could be a panel on the right-hand side, and each individual output could have a switch on it which would route the oscillator output to it. Usual tones would be useful: sine, pink/white noise, freq select, level select, and what I'd call 'glitz', i.e. a stereo signal of a 1kHz test tone with a periodic single gap in the left channel and a periodic double gap in the right channel.

This would help me get my rig set up and checked much more quickly, and mean that when others further down the broadcast chain ask for tone I don't need to route something from my DAW.