• Registered: 2020-04-08
  • Posts: 4

Topic: babyface pro fs vs octamic XTC

both produst does do have same rauschabstände within about these

Rauschabstand AD: 113 dB RMS unbewertet, 117 dB(A)

taken from so offical datasheet by rme-internetpresence.

but there ist a difference in the technicalspecifications.

bf pro fs des do 2 preamps, outherwise the octamic does do have 8 but whit limitations from
the mic and hiZ.

allthough the gain does to be diffefrent on both products!!

for the octamic XTC it does to be sayed: 85 dB Gain Range. Analoger Eingangspegel von -53 dBu bis zu +32 dBu

while the datasheed to the bf pro fs sayes: Regelbereich Gain: -11 dB bis +65 dB

wich means only"?76 dB

and what is the differenz? why is it that way? and otherwise
what might be better or more

and if thateaven in wich sense oder strongnes acually?

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 12,880

Re: babyface pro fs vs octamic XTC

Both devices have excellent technical data. The XTC seems to me to have more level stable inputs and there are some minor differences. But ... have a look at the price difference.

I would recommend to take a step back. What is the purpose of your inquiry? I can't figure it out. Basically it is about very different types of devices.

The BBF Pro is a recording interface with TotalMix FX, which is trimmed for compact dimensions and mobility, but still has a very high quality. The Octamic XTC is a professional 8-channel preamp with MADI support.

What is the point of comparing the technical data of two such different devices in different price ranges and with different number of channels and applications ?

If you want an excellent mobile and compact recording interface in RME quality, then get the BBF Pro.
If you want the flagship recording interface that leaves nothing to be desired, then get the UFX+.
If you want to expand your solution with more preamps, then get a preamp like the XTC or others.
Meanwhile there are also newer models like the 12Mic with MADI and AVB support.

So whats the rationale behind all of your questions ?!

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13
  • Registered: 2020-04-08
  • Posts: 4

Re: babyface pro fs vs octamic XTC

this is not my question. it was not my question.
vorab: it's same situationelike on thoman, where i have bekame no answered!

what is a more stabel inputs?
not eaven 10 points of gain, eaven allthough this funny number to what?, an aed
room to deliliver!

i'm looking for an home-solution. with streets runnig mad outside all day long.
und only nighshifts seem to have enough ruhe to do and run it with kondensator microfones.
this is my propose - im looking for a more level stabel not to do it withbändchen but dynamic mikrofones
inanactceptable quality of recording, noise reduction..

and it should be small und portable
plus i do need just one powerinput and one secound for a stereo with my neumänner km 184!

never the less

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 12,880

Re: babyface pro fs vs octamic XTC

You seem to require a recording interface.
The XTC is no recording interface it doesn't offer TotalMix FX.

For a portable recording interface get BBF Pro or UCX, cheers m8.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13
  • Registered: 2020-04-08
  • Posts: 4

Re: babyface pro fs vs octamic XTC

OK

buti'mlooking vor an mobile interface with strong pres
only two wich is not messured in componys stocktrail!

iknow. nevertheless
i could invest to a madiface fpr totalmixing my xtc pres
with enaugh power to run my dynamic mic

what is so hard to understand a nontechs questioning to the theoretical datas
of unterschiedliche devices?

i asked about
minus 11 to minus 53 of a more or less
levelstabel input
men
making me getting wired?
not to understand myself for some marketigroutines or what the hell u all of u are talking about~

https://www.thomann.de/de/millennia_hv3 … te_mic.htm micsty8

  • Registered: 2020-04-08
  • Posts: 4

Re: babyface pro fs vs octamic XTC

allthoug

if i would by this here https://www.thomann.de/de/sennheiser_mk … o_pair.htm
because of it's sensitivity in the room home with all that streetnoise

in exampel eaven powering this with the babyface and only little, so that i could make
it louder in the mixing later with all the other stuff ...

im locking FOR PRATICAL SOLUTIONS UND VERGLEICHE DES AM AMRKT ZU HABENDEN!

biut noone reacts----
infirme way~

only jelly offtopics to compound
like nooneundeverbefore had thease technichal askings
in the world the hole world with eaven world wide webs
men

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 12,880

Re: babyface pro fs vs octamic XTC

Good luck, I am out of this conversation.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13