• Registered: 2020-10-15
  • Posts: 1

Topic: Will rme ufxii power 250 ohm headphones to optimal level?

https://www.amazon.com/beyerdynamic-770 … 6&th=1

I plan on purchasing the rme ufxII along with Beyerdynamic 770 Pro Studio Headphones. Will I need an amp to power them or will the ufxII be enough?

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 12,869

Re: Will rme ufxii power 250 ohm headphones to optimal level?

UFX II and UFX+ should have enough power, try it out.
Note that you can switch between two different power levels

DA - Stereo Monitor Output Phones (9-12)
As DA, but:
• Output: 2 x 6.3 mm TRS stereo jack, unbalanced
• Maximum output level at 0 dBFS, High: +19 dBu
• Maximum output level at 0 dBFS, Low: +2 dBV
• Output impedance: 2 Ohm
• Max power per channel @ 32 Ohm load, 0.1% THD: 210 mW (2.6 Vrms, +10.5 dBu)

See also my Excel to compare with the other recording interfaces .. you will see, all is fine.

Blog Article: https://www.tonstudio-forum.de/blog/ind … B-MADIfac/

The Excel: https://www.tonstudio-forum.de/index.ph … 0-08-xlsx/

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13
  • From: Sweden
  • Registered: 2013-12-25
  • Posts: 188

Re: Will rme ufxii power 250 ohm headphones to optimal level?

I came here to ask about the differences in UFX II and +, but having found ramses Blog post i now know all I need, brilliant!

Babyface Pro FS, MSI GS66, Studio One
  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 12,869

Re: Will rme ufxii power 250 ohm headphones to optimal level?

Yup, I collected all that I found on RME product pages in the web, the fine manual and in the forum wink

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13