• Registered: 2020-11-09
  • Posts: 4

Topic: FF 800 plus 2 Octamic II's - Wordclock?

Hi, Newbie here,

I have a little home recording studio consisting of a Fireface 800 and 2 Octamic II's which are connected to the FF via ADAT.
I'd like to have a stable system, so I was thinking about syncing all parts of my setup via wordclock.

What would be the possibilities to do so?
To my knowledge there are 2 ways of syncing everything via wordclock:
1. Connecting the Octamics and the FF with a T-shaped BNC cable.
2. Buying a wordclock generator (Apogee Big Ben or Antelope OCX are within my financial limits) and connecting all parts centrally from there.

What would be your recommendation and why?

Thanks!

  • Registered: 2020-11-09
  • Posts: 4

Re: FF 800 plus 2 Octamic II's - Wordclock?

No one?

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,175

Re: FF 800 plus 2 Octamic II's - Wordclock?

IMHO FF800 is well enough to act as clock master in a WC setup.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Jeff
  • Jeff
  • Moderator
  • Offline
  • From: USA
  • Registered: 2007-05-21
  • Posts: 4,664

Re: FF 800 plus 2 Octamic II's - Wordclock?

#1 is perfectly fine. The T connector for BNC word clock should be on the middle device (Octamic #1) and connect the units in series.

Regards,
Jeff Petersen
Synthax Inc.

Jeff's Website

  • Registered: 2020-11-09
  • Posts: 4

Re: FF 800 plus 2 Octamic II's - Wordclock?

Thanks for the input! smile Will try this.

  • Registered: 2020-11-09
  • Posts: 4

Re: FF 800 plus 2 Octamic II's - Wordclock?

Changed the setup today, works like a charm.
Thanks for your help!