1 Topic by waedi (edited by waedi 2021-01-31 07:13:54)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,179

Topic: Multiface ll as standalone adat ?

Is it possible to use my old Multiface ll as an adat AD/DA converter connected via toslink to the Babyface ?
Without connection of the host socket.

Does the unit store the last Totalmix session inside the device ?
When flashing to the latest firmware, is totalmix getting total reset ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 12,867

Re: Multiface ll as standalone adat ?

https://archiv.rme-audio.de/download/mface2_d.pdf
ch 20.1
For me it sounds that the MFII doesn't have internal memory to store settings.
Manual says that you can disconnect it from PC
1. after settings have been done and
2. after connecting Power Supply

Manuals of other recording interfaces have at least a chapter about stand-alone mode and there
are other devices which store at least the last configuration or support up to 6 standalone profiles, which you can recall on demand in stand-alone mode.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13
  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,179

Re: Multiface ll as standalone adat ?

Thank you very much Ramses !

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue