• Registered: 2020-11-21
  • Posts: 1

Topic: Jack not starting (no connection as client to Jack-Server)

Hi,

since I updated from Ubuntu 18.04. to Ubunto 20.04, I somehow can't get Jack to run.

I have already uninstalled all applications (are there further applications i should uninstall)

sudo apt-get remove libffado2 ffado-tools ffado-mixer-qt4 jackd jackd2 jackd2-firewire

Then i installed everything with

sudo apt-get install libffado2 ffado-tools ffado-mixer-qt4 jackd jackd2 jackd2-firewire

But as soon as I try to start Jack the following messages appear

19:30:23.423 Statistik zurückgesetzt.
19:30:23.428 ALSA-Verbindung geändert.
19:30:23.430 D-BUS: Dienst ist verfügbar (org.jackaudio.service aka jackdbus).
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
19:30:23.460 Schaubild der ALSA-Verbindungen geändert.
19:30:43.067 D-BUS: JACK-Server konnte nicht gestartet werden. Tut mir Leid
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
Sat Nov 21 19:30:42 2020: Starting jack server...
Sat Nov 21 19:30:42 2020: JACK server starting in realtime mode with priority 10
Sat Nov 21 19:30:42 2020: self-connect-mode is "Don't restrict self connect requests"
Sat Nov 21 19:30:43 2020: ERROR: firewire ERR: Could not prepare streaming device!
Sat Nov 21 19:30:43 2020: ERROR: Cannot attach audio driver
Sat Nov 21 19:30:43 2020: ERROR: JackServer::Open failed with -1
Sat Nov 21 19:30:43 2020: ERROR: Failed to open server
Sat Nov 21 19:30:43 2020: ERROR: Segmentation Fault!
Sat Nov 21 19:30:43 2020: ERROR: Segmentation Fault!
Sat Nov 21 19:30:43 2020: ERROR: info.si_signo = 11
Sat Nov 21 19:30:43 2020: ERROR: info.si_signo = 11
Sat Nov 21 19:30:43 2020: ERROR: info.si_errno = 0
Sat Nov 21 19:30:43 2020: ERROR: info.si_errno = 0
Sat Nov 21 19:30:43 2020: ERROR: info.si_code  = 1 (SEGV_MAPERR)
Sat Nov 21 19:30:43 2020: ERROR: info.si_code  = 1 (SEGV_MAPERR)
Sat Nov 21 19:30:43 2020: ERROR: info.si_addr  = 0x7f521f7719ea
Sat Nov 21 19:30:43 2020: ERROR: info.si_addr  = 0x7f521f7719ea
Sat Nov 21 19:30:43 2020: ERROR: reg[00]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[00]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[01]       = 0x00007f521f8633e4
Sat Nov 21 19:30:43 2020: ERROR: reg[01]       = 0x00007f521f8633e4
Sat Nov 21 19:30:43 2020: ERROR: reg[02]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[02]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[03]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[03]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[04]       = 0x0000555eefe73d20
Sat Nov 21 19:30:43 2020: ERROR: reg[04]       = 0x0000555eefe73e80
Sat Nov 21 19:30:43 2020: ERROR: reg[05]       = 0x00007f521f8e1ce0
Sat Nov 21 19:30:43 2020: ERROR: reg[05]       = 0x00007f521f8e1ce0
Sat Nov 21 19:30:43 2020: ERROR: reg[06]       = 0x00007f521f866348
Sat Nov 21 19:30:43 2020: ERROR: reg[06]       = 0x00007f521f865ecc
Sat Nov 21 19:30:43 2020: ERROR: reg[07]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[07]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[08]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[08]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[09]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[09]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[10]       = 0x00007f520fffee70
Sat Nov 21 19:30:43 2020: ERROR: reg[10]       = 0x00007f521491ee70
Sat Nov 21 19:30:43 2020: ERROR: reg[11]       = 0x0000555eefe73d20
Sat Nov 21 19:30:43 2020: ERROR: reg[11]       = 0x0000555eefe73e80
Sat Nov 21 19:30:43 2020: ERROR: reg[12]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[12]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[13]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[13]       = 0x0000000000000000
Sat Nov 21 19:30:43 2020: ERROR: reg[14]       = 0x00007f5220eea3bf
Sat Nov 21 19:30:43 2020: ERROR: reg[14]       = 0x00007f5220eea3bf
Sat Nov 21 19:30:43 2020: ERROR: reg[15]       = 0x00007f520fffeda0
Sat Nov 21 19:30:43 2020: ERROR: reg[15]       = 0x00007f521491eda0
Sat Nov 21 19:30:43 2020: ERROR: reg[16]       = 0x00007f521f7719ea
Sat Nov 21 19:30:43 2020: ERROR: reg[16]       = 0x00007f521f7719ea
Sat Nov 21 19:30:43 2020: ERROR: reg[17]       = 0x0000000000010202
Sat Nov 21 19:30:43 2020: ERROR: reg[17]       = 0x0000000000010202
Sat Nov 21 19:30:43 2020: ERROR: reg[18]       = 0x002b000000000033
Sat Nov 21 19:30:43 2020: ERROR: reg[18]       = 0x002b000000000033
Sat Nov 21 19:30:43 2020: ERROR: reg[19]       = 0x0000000000000014
Sat Nov 21 19:30:43 2020: ERROR: reg[19]       = 0x0000000000000014
Sat Nov 21 19:30:43 2020: ERROR: reg[20]       = 0x000000000000000e
Sat Nov 21 19:30:43 2020: ERROR: reg[20]       = 0x000000000000000e
Sat Nov 21 19:30:43 2020: ERROR: reg[21]       = 0x0000000000005a07
Sat Nov 21 19:30:43 2020: ERROR: reg[21]       = 0x0000000000005a07
Sat Nov 21 19:30:43 2020: ERROR: reg[22]       = 0x00007f521f7719ea
Sat Nov 21 19:30:43 2020: ERROR: reg[22]       = 0x00007f521f7719ea
Sat Nov 21 19:30:43 2020: ERROR: Stack trace:
Sat Nov 21 19:30:43 2020: ERROR: Stack trace:
Sat Nov 21 19:30:43 2020: ERROR: End of stack trace
Sat Nov 21 19:30:43 2020: ERROR: End of stack trace
Sat Nov 21 19:30:43 2020: ------------------
Sat Nov 21 19:30:43 2020: Controller activated. Version 1.9.12 (unknown) built on Thu Apr 16 10:21:43 2020
Sat Nov 21 19:30:43 2020: Loading settings from "/home/basementmedia/.config/jack/conf.xml" using expat_2.2.9 ...
Sat Nov 21 19:30:43 2020: setting parameter 'engine':'driver':'(null)' to value "alsa"
Sat Nov 21 19:30:43 2020: setting parameter 'engine':'realtime':'(null)' to value "true"
Sat Nov 21 19:30:43 2020: setting parameter 'engine':'verbose':'(null)' to value "false"
Sat Nov 21 19:30:43 2020: setting parameter 'engine':'client-timeout':'(null)' to value "500"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'firewire':'rate' to value "44100"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'firewire':'capture' to value "true"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'firewire':'playback' to value "true"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'firewire':'inchannels' to value "16"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'firewire':'outchannels' to value "16"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'device' to value "hw:0"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'capture' to value "hw:0"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'playback' to value "hw:0"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'rate' to value "44100"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'period' to value "1024"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'nperiods' to value "2"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'hwmon' to value "false"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'hwmeter' to value "false"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'duplex' to value "true"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'softmode' to value "false"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'monitor' to value "false"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'dither' to value "n"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'inchannels' to value "2"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'outchannels' to value "2"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'alsa':'shorts' to value "false"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'netone':'rate' to value "44100"
Sat Nov 21 19:30:43 2020: setting parameter 'drivers':'dummy':'rate' to value "44100"
Sat Nov 21 19:30:43 2020: Listening for D-Bus messages
19:30:45.106 Keine Verbindungsaufnahme als Client zum JACK-Server möglich. - Gesamtbetrieb schlug fehl. - Verbindungsaufnahme zum Server gescheitert. Bitte sehen Sie im Meldungsfenster nach weiteren Informationen.
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock

I have no idea what else I could try and hope for your help ;-(

Best regards
Daniel

By the way: I am from germany, so you can also answer in german ;-)

  • Registered: 2020-08-18
  • Posts: 7

Re: Jack not starting (no connection as client to Jack-Server)

Have you ever solved this?  I keep having issues with other hardware with Jack and Ffado. I will be able to see the hardware it just does not seem to want to allow the use of inputs. I have not tried with RME hardware as they are on the new system. 

I have looked at Pipewave and seems interesting that it uses the throughout pro audio needs albeit it’s being set up for consumer use.  I’m using OpenSuse so that itself is ilarge difficult obsracle.

Just wondering about your issue as it pertains to RME with the same drivers I will have to work with soon.