• Registered: 2021-10-28
  • Posts: 1

Topic: Newbie needs settings assist

Hi all,

Just purchased a ADI-2 Pro FS R BE, and hooked it up to a Windows 10 DAW (Wavelab 11)

When I use the analog inputs, it ports great to my DAW (ASIO driver is installed)

But when I send AES digital signal, I get input to the ADI-2 Pro, but no output to the USB to my DAW. I Cant hear anything to the headphone outputs either.

From reading the manual, it says I need to set the ADI to multichannel? And activating the SRC?

I cant get to the multichannel setting (I cant even find it!) and the SRC option is greyed out.

Can anyone tell me where these parameters are, and what to set for my purpose?

Thanks!

2 Reply by intalentive (edited by intalentive 2021-10-28 20:36:21)

  • Registered: 2021-10-12
  • Posts: 8

Re: Newbie needs settings assist

Multichannel mode is in Setup -> Options -> Device Mode / DSD. Be advised you can only change between multichannel and stereo mode with the USB cable unplugged.

I haven't used AES so I can't help you with that.

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 12,116

Re: Newbie needs settings assist

gsmaster wrote:

Hi all,

Just purchased a ADI-2 Pro FS R BE, and hooked it up to a Windows 10 DAW (Wavelab 11)

When I use the analog inputs, it ports great to my DAW (ASIO driver is installed)

But when I send AES digital signal, I get input to the ADI-2 Pro, but no output to the USB to my DAW. I Cant hear anything to the headphone outputs either.

From reading the manual, it says I need to set the ADI to multichannel? And activating the SRC?

I cant get to the multichannel setting (I cant even find it!) and the SRC option is greyed out.

Can anyone tell me where these parameters are, and what to set for my purpose?

Thanks!

Pls read manual ch 17.4
https://www.rme-audio.de/downloads/adi2profsr_d.pdf
https://www.rme-audio.de/downloads/adi2profsr_e.pdf

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13