You are not logged in. Please login or register.
RME User Forum → FireWire & USB series → Fireface UFX and Ferrofish A16 mkII
Hi guys, my RME Fireface UFX no longer sees the Ferrofish A16 connected via ADAT .. the signal is green on the Ferrofish, but it is not locked. In fact, on the RME the Adat1 led is not on .. what could have happened? thanks!!
The Fireface settings dialog is working ?
What are the settings ?
The Fireface settings dialog is working ?
What are the settings ?
Yes. everything seems to work .. internal clock at 44.1 .. only the ADAT led does not light up ..
And the clock setting inside the Ferrofish is clock-source = adat ?
And the clock setting inside the Ferrofish is clock-source = adat ?
Yes ADAT 44,1
The adat cables are sitting tight ?
May you test with clock setting the other way round.
Fireface clock-source adat
Ferrofish internal
The adat cables are sitting tight ?
May you test with clock setting the other way round.
Fireface clock-source adat
Ferrofish internal
Ferrofish does not give the possibility to set internal clock
The adat cables are sitting tight ?
May you test with clock setting the other way round.
Fireface clock-source adat
Ferrofish internal
Cables are tight
Set the UFX to internal clock and loop an ADAT output back to the input - does that work?
Ferrofish does not give the possibility to set internal clock
Of course it does. internal clock means it is set as master.
Mit der SYNCHRONIZATION Taste können Sie nun wählen, ob das Gerät als Master arbeiten, oder die Abtastfrequenz aus MADI, ADAT oder BNC beziehen soll.
RME User Forum → FireWire & USB series → Fireface UFX and Ferrofish A16 mkII
Powered by PunBB, supported by Informer Technologies, Inc.