1 Topic by WaihekeSoundie (edited by WaihekeSoundie 2021-12-22 23:16:44)

  • Registered: 2020-07-15
  • Posts: 15

Topic: Fireface UC: Headphone Pan changes when I change level rotary on hw

Hi there,
I'm prob doing something dumb but I have this weird thing where if I select the PH level setting on my Fireface UC using the front panel rotary and then change volume level with it I get a change in volume but ALSO a change in PAN of the headphones. In fact it seems to control PAN primarily. But backwards-- so rotation to left PANS the stereo HP mix to the right and vice versa.

Volume of the HP IS is affected but the hardware's adjustment is kind of latched - so it will not reduce the level of the channel below any level directly set in TotalMix by the user with the mouse.

Have I got into some hardware or TotalMix mode that I can unset?
I have tried rebooting the hardware and TotalMix.

Thank you!!??

2 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,525

Re: Fireface UC: Headphone Pan changes when I change level rotary on hw

This has been pointed out here several times. You are in the wrong channel mode (stereo or mono) conflicting with the channel mode in TotalMix FX. Change that at the unit.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2020-07-15
  • Posts: 15

Re: Fireface UC: Headphone Pan changes when I change level rotary on hw

Thank you Matthias.. that was it.
(I did try to find this issue on the forum before I posted).


Thanks for your help