• Registered: 2021-07-07
  • Posts: 6

Topic: RME ADI 2 PRO - breakout cable

Hi,
Can someone share the diagram of the breakout cable.
My SPDIF out stopped working. I measured the cable and is the RCA is not connected to any of the multipin connection.
So a schematic diagram would be very helpful, so I could try fixing it. Thanks !

2 Reply by KaiS (edited by KaiS 2021-10-21 11:54:59)

  • KaiS
  • DAW Mastermind
  • Offline
  • From: Germany
  • Registered: 2020-02-05
  • Posts: 3,195

Re: RME ADI 2 PRO - breakout cable

krasigeshev wrote:

Hi,
Can someone share the diagram of the breakout cable.
My SPDIF out stopped working. I measured the cable and is the RCA is not connected to any of the multipin connection.
So a schematic diagram would be very helpful, so I could try fixing it. Thanks !

Look at the manual, page 69.

Pin 2: SPDIF Out + (Center)
Pin 6: SPDIF Out - ( Screen)

KaiS's Website

  • Registered: 2021-07-07
  • Posts: 6

Re: RME ADI 2 PRO - breakout cable

Thanks !

  • Registered: 2022-01-23
  • Posts: 15

Re: RME ADI 2 PRO - breakout cable

It would be useful if the manual mentions that the RCA connectors of the breakout cable are labelled with "SPDIF in" and "SPDIF out", whereby the white connector corresponds to SPDIF in, the red connector to SPDIF out.