You are not logged in. Please login or register.
RME User Forum → ADI-2 & 2/4 Pro series, ADI-2 DAC series → Left and Right audio level
Hi There,
I have ADI-2 PRO FS R Black edition, trying to record some of my vinyl to 32 bit/768,000, got into a problem that my right channel is very low as compared to left.
on the monitor screen when I turn on M/S proc then it's fine on both levels are equal
but while recording its same problem
M/S processing makes no sense here.
Vinyl isn’t M/S.
As a test, can you please L<>R swap the input plugs on ADI-2 Pro and report back?
And check they’re all the way in!
I have tried changing L R but no help
the left channel is still louder
also, when I switch the AD conversion to DSD both channels are equal but the volume is very low
Is the level difference visible on ADI-2’s level meters for analog input?
(Visible in the Global Level Meter page, press Encoder 1 three times).
As a test, try a lower resolution, like 44.1 kHz /16 bit, to exclude a communication problem.
And forget DSD, it’s a pain in the ...
Casual observation here...
Dubbing Vinyl at such high SR is seemingly likely to invite HF Non-Audio content that can result in very high levels of Intermodulation Distortion which will only detract from the listening experience.
A Tonearm's Wiring makes a fine Antenna for heaven knows what type of trash to be introduced. 96/24 is generally what Vinyl Archivers prefer.
Just Saying!
Curt
RME User Forum → ADI-2 & 2/4 Pro series, ADI-2 DAC series → Left and Right audio level
Powered by PunBB, supported by Informer Technologies, Inc.