1 Topic by derocha (edited by derocha 2023-06-28 16:27:28)

  • Registered: 2023-04-03
  • Posts: 4

Topic: Line input gain not working on UFXiii

Can't I change the line input gain on fireface ufx iii like I was able to do on the legacy ufx ? I move the fader on totalmix and nothing happens. I can just choose between +13 or +19dBu but the gain knob right below it do nothing. Am I missing something ?

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,546

Re: Line input gain not working on UFXiii

Sure the gain knob is for the input socket you want to use ? By mistake trying the wrong input channel in Totalmix can happen...?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue

3 Reply by derocha (edited by derocha 2023-06-28 17:43:54)

  • Registered: 2023-04-03
  • Posts: 4

Re: Line input gain not working on UFXiii

Totally sure I'm on the right input. I've been having this problem for a while now on different channels and equipment inputs when I want to put a little more gain. Weird. The gain knob simple do nothing. Meanwhile, on the four mic pres the gain works fine.

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,546

Re: Line input gain not working on UFXiii

May be a Total reset is to try

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Jeff
  • Jeff
  • Moderator
  • Offline
  • From: USA
  • Registered: 2007-05-21
  • Posts: 4,665

Re: Line input gain not working on UFXiii

Make sure the driver and firmware are both updated.

Regards,
Jeff Petersen
Synthax Inc.

Jeff's Website