1 Topic by jxshellixtt (edited by jxshellixtt 2023-08-12 02:23:50)

  • Registered: 2023-08-12
  • Posts: 4

Topic: UCX II powered by Cioks DC7?

So I’m building a mini half rack to house my UCX II and two Shure wireless receivers. I’m considering powering it all from a Cioks DC7 to save space. This is for live use onstage.

As long as I match current, voltage and tip polarity is there any harm powering the RME this way?

The other option would be to power it all from a half rack power conditioner but that would be more cramped with the power supplies from each device.

(I’ve powered a Motu interface and the wireless receivers this way before with no issue)

2 Reply by waedi (edited by waedi 2023-08-12 07:07:22)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,169

Re: UCX II powered by Cioks DC7?

No problem. Power requirements are described in the user manual and often at the unit itself on a small label next to the power socket.

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue