• Registered: 2023-12-09
  • Posts: 2

Topic: How to exit class compliant mode re fireface UFX

Hi any one know how to exit class compliant mode .

Regards Kev

2 Reply by waedi (edited by waedi 2023-12-09 01:12:12)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,543

Re: How to exit class compliant mode re fireface UFX

Activation and deactivation is the same procedure :
Activation of the Class Compliant mode: Remove USB and FireWire cable from the UFX. Press SETUP/REV. Turn encoder 1 until Options appears in the display. Turn encoder 2 until Hard- ware/Diagnosis appears. Push encoder 2 several times to select the entry CC Mode. Turn en- coder 2 to switch CC mode on (or off). The UFX reboots, all LEDs light up, after which it will be in Class Compliant mode.

From user manual page 91
https://archiv.rme-audio.de/download/fface_ufx_e.pdf

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2023-12-09
  • Posts: 2

Re: How to exit class compliant mode re fireface UFX

Thanks for your help much appreciated