1 Topic by kvn864 (edited by kvn864 2018-04-13 05:55:53)

  • Registered: 2018-04-13
  • Posts: 6

Topic: ADI-2 DAC, switch HP and line out outputs

Hello
I would like to find out if there is a way to program one of the buttons on the remote (1, 2, 3, 4) to switch output to headphone jack, or the line out, without pulling 1/4 inch plug out. I don't want them be ON all the time, but rather one or the other. For example: the headphone is playing, then I want to redirect the sound to line out on the back (the 1/4 inch plug is still in) so the speakers are playing now, and headphones are not.
Thanks

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,183

Re: ADI-2 DAC, switch HP and line out outputs

See my blog article: https://www.tonstudio-forum.de/blog/ind … tup-EN-DE/

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Registered: 2018-04-13
  • Posts: 6

Re: ADI-2 DAC, switch HP and line out outputs

when I program "Toggle Ph/Line" to button 1, when pressed I get

Toggle Ph/Line
Function is off

I picked button 1 because I dont need "mono" function ..
Thanks

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,183

Re: ADI-2 DAC, switch HP and line out outputs

Ok, so it seems to work, great wink

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Registered: 2018-04-13
  • Posts: 6

Re: ADI-2 DAC, switch HP and line out outputs

no, it doesn't. when I press the button, HP are still on, and line out isnt activated, I just see very briefly the message
Toggle Ph/Line
Function is off
on the display, no switching is happening.

6 Reply by ramses (edited by ramses 2018-04-13 11:44:51)

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,183

Re: ADI-2 DAC, switch HP and line out outputs

The ADI-2 DAC is a little bit different, but based on the ADI-2 Pro settings it only requires this:

Options -> Device Mode
Mute Line  Toggle Ph/Line

Options -> HW/Diagnostics
Remap Keys: ON
I/O Key: Toggle Ph/Line

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14

7 Reply by kvn864 (edited by kvn864 2018-04-13 12:25:52)

  • Registered: 2018-04-13
  • Posts: 6

Re: ADI-2 DAC, switch HP and line out outputs

Thanks, finally figured it out. Works well now.

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,183

Re: ADI-2 DAC, switch HP and line out outputs

Cool, thanks for the feedback.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Registered: 2018-04-13
  • Posts: 6

Re: ADI-2 DAC, switch HP and line out outputs

I don't know if this is a proper place to ask but: I am using the unit connected to my PC via optical interface, and its sounds amazing. Is there any benefit to install usb driver and use that?

  • From: Milan, Italy
  • Registered: 2018-09-15
  • Posts: 33

Re: ADI-2 DAC, switch HP and line out outputs

I want o use the 2nd DAC driving PH 3/4 as line output: is it enough to set to ON the Mute vs. TRS 3/4 setting (device mode menu paragraph 14.1.3). What about high power? Should I turned it off or it doesn't care il line mode?

DAW: W10 mini PC (i5)
Server: JRiver 30+Dirac+Acon Declick
DAC: RME ADI2 PRO Speakers ATC SCM50ASL

11 Reply by Mac Arthur (edited by Mac Arthur 2023-12-12 07:55:36)

  • Registered: 2023-09-29
  • Posts: 3

Re: ADI-2 DAC, switch HP and line out outputs

ramses wrote:

The ADI-2 DAC is a little bit different, but based on the ADI-2 Pro settings it only requires this:

Options -> Device Mode
Mute Line  Toggle Ph/Line

Options -> HW/Diagnostics
Remap Keys: ON
I/O Key: Toggle Ph/Line

Thanks!
And then how do you move back and forth from headphones to line out setup?
Many thanks for your help