You are not logged in. Please login or register.
RME User Forum → ADI-2 & 2/4 Pro series, ADI-2 DAC series → Zoom audio routing
I use an Adi-2 Pro FS BE for teaching via Zoom. I sometimes struggle to play/demonstrate something as I can't hear myself properly when using headphones. Is there a way to route the sound from my mic to my headphones whilst also sending the same audio to Zoom?
May be enabling Hi-power could help you out ?
Hi-Power
OFF, ON. Default: OFF. Reference level for 0 dBFS is +7
dBu at the output. With Hi-Power on reference level is 15 dB
higher, +22 dBu.
Would Hi-Power route the audio to my headphones? There is currently no signal going into the phones from the mic when Zoom is active. The audio I hear is from the other participant in the call. It seems Zoom is routing their audio to my phones but I don't hear any of my own audio. To be honest I'm not sure whether this is a limitation of Zoom's audio settings or whether I can get around it with some fancy solution using the Adi 2.
Zoom is sending and receiving on channels 1/2 fix.
In the menu in the ADI-2 you have to select the source for headphones.
Select USB 1/2
ADI-2 has no provision for mixing multiple sources, like the mic and the audio from Zoom.
This has to happen inside the host, e.g. Zoom, or in the Windows Mixer.
RME User Forum → ADI-2 & 2/4 Pro series, ADI-2 DAC series → Zoom audio routing
Powered by PunBB, supported by Informer Technologies, Inc.