1 Topic by brantharradine (edited by brantharradine 2024-06-13 20:43:13)

  • Registered: 2024-06-13
  • Posts: 1

Topic: UFX+ not recognized after Mac Sonoma OS and driver 410 install

Intel Mac.  updated to Sonoma OS and UFX+ not recognized.  updated the driver (410) and accepted the 2 security approvals as directed in the instructions for diver installation but still will not recognize.
All production is at a standstill!
Update: Diver 3.31 seems to do the job.  FYI to anyone who experiences the same.

Update: order of operations:
-driver 3.31 update
-update firmware with new flash update tool download
-driver 4.10 update

https://rme-audio.de/driverkit-info.html

  • From: Haimhausen
  • Registered: 2012-04-02
  • Posts: 239

Re: UFX+ not recognized after Mac Sonoma OS and driver 410 install

Check if you see the UFX+ in the ystem report, simular like here:
https://www.dropbox.com/scl/fi/5f622be6 … t&dl=0

If it's not there check your usb cable connection, leave out adapters and hubs when possible.

If it's there install the driver again and do not forget to allow the driver in the privacy and security settings like described here:
https://rme-audio.de/rme-macos.html

Regards,
Audio AG Support

Audio AG Support's Website