1 Topic by pmemmer (edited by pmemmer 2024-06-26 01:00:17)

  • Registered: 2024-06-26
  • Posts: 2

Topic: UCX II Channels 7/8 Reference Levels

I finally made the upgrade from my trusty FF400 to the UCX II... Very happy so far, but I've encountered a problem which has me scratching my head: while the line outputs of channels 1 to 6 have a three stage reference level setting, channels 7/8 only have a two stage setting, so presumably there is no way I can have an equal reference level of +13dbu across all 8 output channels? And why the omission on channel 7/8 of this particular reference level? On the FF400, it could be achieved very easily, so I wonder if I might be missing something...

2 Reply by oli77sch (edited by oli77sch 2024-06-26 07:34:20)

  • Registered: 2016-06-14
  • Posts: 1,142

Re: UCX II Channels 7/8 Reference Levels

I think there is detailed information about that in the manual.
EDIT: no sorry, it isn’t!

UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2

3 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: UCX II Channels 7/8 Reference Levels

7/8 are Phones, there we have Low and High power typically. Use High power and set the output fader to -6 dB...

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2024-06-26
  • Posts: 2

Re: UCX II Channels 7/8 Reference Levels

Ok, will try that. Thanks, Matthias!