• Registered: 2024-07-27
  • Posts: 2

Topic: OSC Addressing MicGain 9 and up

I am using OSC to set the mic gain for inputs on my Fireface UFX II.

I have the mics setup to run mono, so there are 8 AN inputs, and 4 Mic inputs.

OSC works through sending floating point values to /1/micgain1 thru /1/micgain8 on the Analog inputs.

However, I cannot get it to change the values for /1/micgain9 thru /1/micgain12, am I using the correct OSC setup for these? Is there anything I am missing?

2 Reply by maggie33 (edited by maggie33 2024-07-28 02:30:58)

  • From: Germany, Tuvalu, Poland, Chile
  • Registered: 2021-07-27
  • Posts: 470

Re: OSC Addressing MicGain 9 and up

In TM, under OSC Settings, in your current controller, change in "Number of faders per bank" from 8 to 12 (or higher) in the Dropdown Menu.

Edit: If (for whatever reason) you want/have to stay on 8 Faders per bank in TM, you can also achieve this by navigating.

2 examples:
1) shift 1 channel to right via sending /1/track+ first -> then you can control your Mic9 via /1/micgain8
2) shift the banksize (8 channels in your case) to right via sending /1/bank+ first -> then you can control your Mic9 via /1/micgain1

Have a look into the OSC Table: https://www.rme-audio.de/downloads/osc_ … ix_new.zip

“Do It For Her”
My Gear: Bontempi Magic light Keyboard
  • Registered: 2024-07-27
  • Posts: 2

Re: OSC Addressing MicGain 9 and up

Thank you! This absolutely solved the issue.