• From: London
  • Registered: 2022-12-13
  • Posts: 17

Topic: Can't get UFX III to work with M1 MBP

I was using a RAYDAt with a Sonnet Chassi until recently. I used the kernel drivers. I've since bought a UFX and cannot for the life of me get it to work. I'mm trying to use the drive kit drivers which on first install brought up the cmd windows to remove the kernel drivers but when I plug in the UFX only thr Fireface USB setting come up , which show the UFX but the sampel rate shows 32000Hz which I knwo is a red flag! The Total mix softwaredoesn't open with anything and if I try load my workspace from my windows machine it says software mismatch.


ive reisntalled everything twice now but nothing seems to work.... help....

I thought 'Macs just work?

M

7950x-win 11|Macbook pro M1 Max-Sonoma| RME Raydat-Ferrofish| Sonnet TB

norburybrook's Website

2 Reply by waedi (edited by waedi 2024-08-12 14:55:40)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,541

Re: Can't get UFX III to work with M1 MBP

The Fireface Settings is showing what version number of firmware ? Should be this : Fireface UFX III: USB 20 DSP 23 CC 44
And the sample rate, is it possible to change it from 32kHz to 48kHz ?
Why should 32kHz be a red flag ? It is just a setting to set by you.
Check MacOS system preferences
Security & Privacy
scroll down, is there an ALLOW button for allowing the driver ?
Security & Privacy / Microphone
is Totalmix listed and enabled ?

You did restart the computer, right ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • From: London
  • Registered: 2022-12-13
  • Posts: 17

Re: Can't get UFX III to work with M1 MBP

waedi wrote:

Check MacOS system preferences
Security & Privacy
scroll down, is there an ALLOW button for allowing the driver ?


That was it smile

Thankyou .

M

7950x-win 11|Macbook pro M1 Max-Sonoma| RME Raydat-Ferrofish| Sonnet TB

norburybrook's Website