You are not logged in. Please login or register.
RME User Forum → FireWire & USB series → Babyface pro fs not changing between output and headphone
Hi, since I updated drivers weeks ago, when I push OUT button all lights shine, then the two LED rows shows inverted T, then all lights go off, and go back to default. I can control the speakers volume but I cannot change to phones volume.
I tried uninstalling and reinstalling drivers, deleting controller from the device manager then reinstalling, but none works.
Can you help me please?
Thanks in advance, Alex.
You should mention os, firmware and driver version for reference.
I'm sorry.
Windows 11
Driver version: 1.251
Hardware revision: 206
I am not sure what 'inverted T' looks like, but this has nothing to do with the driver. If the out button does not toggle between the three outs then you are not in default mode, or a different button is permanently pushed (left In?). Try them all to check if one is stuck.
These are the states when I press the OUT button, I upload some pictures so you can see what is light on:
1 - (all lights on) https://drive.google.com/file/d/1PFwGuj … drive_link
2 - (the inverted T one) https://drive.google.com/file/d/1PDG4B6 … sp=sharing
3 - (all lights off) https://drive.google.com/file/d/1PCN3w1 … sp=sharing
4 - back to only Ch 1/2 lights on
When pushing it goes across in this succession staying in each state 2/3 seconds before changing to the next.
Thank you again for your help!
It seems IN button short-circuited.
Oh
Oh
RME User Forum → FireWire & USB series → Babyface pro fs not changing between output and headphone
Powered by PunBB, supported by Informer Technologies, Inc.