You are not logged in. Please login or register.
RME User Forum → MADI/AES Premium Line → Midi remote loses midi contact
Hello
I have a saved a workspace with MidiiRemote controlling three Micstassy?s.
On start up, it changes the midi in/out configuration so that I each time have to set it up manually and find the right interface. This happens no matter if I use Madi as connection or the Motu Midi Express.
Any solutions to this?
Thank you for your time.
Best regards, Thomas
I have a similar issue with remote control.
Many times i have to reset the midi output to madi channel 3 to obtain remote control. As if the software forgets the remote midi settings.
I would like to set and forget.
Windows or Mac?
Mac Pro.
HDSP/3 Micstasy?s
Motu Midiexpress 128
Is that only a problem when you change your MIDI devices? Means the setting is wrong when you remove the Motu?
yes = this is the case .... with respect to my setup on windows
the setting goes wrong when i don't boot up with mackie control pro and its 4 USB ports in winxp... otherwise all fine..
That's quite logical. We do not store the MIDI port name, we store the port reference, its number. We will try if we can change that.
In my case, the hardware setup is always the same. I dont remove the Midi Express. But for some reason at boot, Midi Remote defaults to FF800?s mididriver even when the workspace is properly saved to the Midi Express settings.
RME User Forum → MADI/AES Premium Line → Midi remote loses midi contact
Powered by PunBB, supported by Informer Technologies, Inc.