Topic: 9652 and Digicheck - happy user

I'M TOTALLY INLOVE WITH MY RME9652 ALL OVER AGAIN!!!!!! I bought the new windows 7 pro yesterday and installed it. got the new drivers for my 9652 and the Digicheck....and DAMMM!! i like the new surround feature and the Global Record!! no longer do i have to use my software to track when i'm using an analogue mixer!! nice 1 RME! and the new look of the meter section,....COOL!! i'm sticking to my RME.

Re: 9652 and Digicheck - happy user

DC global recorder rules cool

and you can even start two A,B recorders at once, then swap from one to the next to cut your long recording runs into pieces that prevent you from loosing your entire session if any crash happens ... ed:
Just care to start one prior stopping and saving the other, while you can even more take a cool time to edit your file name and storage destination without lost audio :-)

A question to MC if reading through this topic:

I would appreciate in the recorder setting panel to select the recording file resolution, between 16,20,24 bits in order to optimize bandwith and file size
Would that be technically possible ? HeadScratch

HDSP9632, HDSP9652, ADI-8QS, FFUC, Quadmic II

3

Re: 9652 and Digicheck - happy user

Makes no real sense technically. DC is optimized for 24 bits throughout. The saving in disk space - who cares about that in 2010?

Regards
Matthias Carstens
RME

4 (edited by Schubertriad 2010-03-31 11:23:40)

Re: 9652 and Digicheck - happy user

I was just born in the time of the floppy disk though, hence my concern to compile data in the memory space at true need ...:rolleyes:
But you're right, memory storage is not longer an issue nowaday

As I am running an FFUC cool I was thinking about saving bandwith hence further more secure the audio stream from dropouts, but if its contender is still 24 bits shaped -no matter the bytes filled in-  it does not make sense either neutral

I maybe have a last argument to present in the direction for truncating into 20 bits direct from recording
It's well known that the last four LSBs are made of electronic floor noise, not to say simply the venue ambient and mic noises, leaving a really excellent 114 dynamic range available for music related digitizing matter when I usually set my preamps around - 6dBfs for safe margin (no limiter or compressor engaged for my classical pieces)
I experienced a pristine output while applying SRC workflow with Weiss Saracon starting from raw 16/44.1 takes and ending at 24/96 for my final mastering work, allowing the core DSP computing to apply with "pure" audio representing bits and outputting that last LSBs with either POWRx or TPDF dither that better fits from a musical sense, thanks to the "asynchronous correlation" between both
But 16bits is weak with classical music with content of very low loudness as ppp cues, that is why I am pretty much in favor of the 20/44.1 primary recording format in my case which perfectly matches with my FFUC workframe :-)

All the best

HDSP9632, HDSP9652, ADI-8QS, FFUC, Quadmic II