• Registered: 2009-03-04
  • Posts: 16

Topic: RME Hammerfall DSP PCI - problems booting machine

Hello.

We're having troubles with a RME Hammerfall DSP PCI Interface Card.

When we put the card the machine doesn't boots up. We don't see BIOS message, don't hear any beep, nothing.

If we continue turning on and off the machine... after 15-20 minutes it works, arrives windows, and everything seems to be ok, we can restart a lot of times without any problem but if we power off tha machine and wait 30 minutes we get the same problem. It's like a cycle.

Any idea?

We have tried the card on different pc's and works.
We have tried the card on 2 motherboards intel s5520sc and the problem appears in both cases.


Specifications:

Mo: Intel s5520sc
Tested with different combinations of RAM.
Tested with different power supplies.
Tested with hard disks and without hard disks.

Thank you

2 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,679

Re: RME Hammerfall DSP PCI - problems booting machine

Change the blue jumper position on the PCI card (see manual). Post its PCB revision and firmware revision.

Regards
Matthias Carstens
RME

MC's Website