• Registered: 2011-06-30
  • Posts: 3

Topic: fire face UFX Low out put

Hi
I have low out put to my mixer  via the direct outs on the fire face UFX.

I have boosted every knob and fader I know how to.

I also seem to be having problems assining channels for direct out in total mix.

Should I be able to use the 8 out puts with with an out board mixer ?
If so could someone please tell me how to assign the out puts. I know how to do this in Pro tools 9
but i cant seem to make it happen in total mix

thanks

Neal

  • Knut
  • Knut
  • DAW Mastermind
  • Offline
  • Registered: 2007-04-06
  • Posts: 1,618

Re: fire face UFX Low out put

I have low out put to my mixer via the direct outs on the fire face UFX.

Please check the reference level settings for the outputs (manual page 58).

I also seem to be having problems assining channels for direct out in total mix.

Connect the outputs with the mixer. Click every output (it gets brighter) and set the fader of every input and every software playback channel to a value of your choice. If you just want to route your Pro Tools tracks to outputs - one track to a single output - click the output and set only the fader of the playback channel to the accompanying output. All other inputs and playback channel faders to off.

Please check out our tutorial videos for TotalMix: RME Youtube channel

best regards
Knut

  • Registered: 2011-06-30
  • Posts: 3

Re: fire face UFX Low out put

thank you.

sometimes its sitting right there starring you in the face and you just cant see it.